Assigning The Function Buttons - HP S240n User Manual

Pressing one of the three bezel buttons activates the buttons and displays the icons above the buttons. The

factory default button icons and functions are shown below.

Button

1

Menu

button

2

+

(Plus) button

3

–

(Minus) button

4

OK

button

You can change the Function buttons from their default values so that when the buttons are activated you can

quickly access commonly used menu items.

To assign the Function buttons:

1.

Press one of the four rear bezel buttons to activate the buttons, and then press the

the OSD.

2.

In the OSD menu, select Menu Control > Assign Buttons and then select one of the available options for

the button you want to assign.

NOTE:

You can only reassign the three Function buttons. You can not reassign the

button.

Function

Press to open the OSD menu, select a menu item from the OSD, or close

the OSD menu.

If the OSD menu is open, press to navigate forward through the OSD

menu and increase adjustment levels.

If the OSD menu is closed, press to advance to the next active input port

(USB Type-C, HDMI, DisplayPort).

If the OSD menu is open, press to navigate backward through the OSD

menu and decrease adjustment levels.

If the OSD menu is closed, press to advance to open the Viewing Modes

menu.

If the OSD menu is open, press to confirm selection.

If the OSD menu is closed, press to open the Information menu.

Menu

button to open

Menu

button or the

Assigning the Function buttons

Power

15