Table of Contents
Operation
connection manually.
Follow Steps 1 through 5 in the "How to set up
automatically" procedure.
button
Press the
/
Manual.
Address Type
IP Address
Subnet Mask
Default Gateway
Audio
Primary DNS
Secondary DNS
Channel
Function
Lock
Enter the IP Address, Subnet Mask, Default
Gateway, Primary DNS and Secondary DNSentry
values. Use the number buttons on your remote to
enter numbers and the
press the BACK
remote.
Select Connection Test to check the Internet
connectivity.
Connecting to a Wireless Network
To connect your TV to your wireless network, you need
a wireless router or modem and a wireless LAN Adaptor
(included), which you connect to the USB input.
Back of TV
USB
Wireless
Router
LAN Cable
Note
You must use the included Wireless LAN Adaptor
(included)
to connect to a wireless network.
To use a wireless network, your TV must be
connected to a wireless router. If the wireless
router
supports DHCP, your TV can use a DHCP
or static IP address to connect to the wireless
network.
The Included Wireless LAN adapter supports IEEE
802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N.
EN-21
Haier LED HDTV
to select address type
Manual
Move
Back
/
/
/
buttons to
button on the
Wireless LAN Adapter
(WiFi Dongle)
The LAN Port on the Wall
When you play DLNA video over IEEE 802.11B/G
connection, the video may not play smoothly.
If the wireless
router
Select a channel for the wireless
currently being used. If the channel set for the
wireless
router
is currently being used by another
device nearby, this will result in interference and
communications may fail.
When connecting the Wireless LAN Adapter to the
TV in 802.11N mode, WEP/TKIP/TKIP-AES is not
supported
C onnection methods: you can set up the wireless
network connection four ways. Haier Auto
manually.
Yahoo! Connected TV version info
Press ENTER button to display the Yahoo version.
Yahoo! Connected TV Reset Default
Press ENTER button, and select YES item to return the
Yahoo settings to the initial state.
Reset Default
Press the
/ ENTER button to enter the submenu.
will be changed to the factory default setting.
Resetting to the
and function settings only. All Channel programming
information remains as it was.
Lock Menu
Parental Control can be used to block specific channels
and content by using a rating system.
The parental control function is used to block program
viewing based on the ratings sent by the broadcasting
station. The default setting is to allow all programs to be
viewed. Viewing can be blocked by choosing the type of
the program and the categories.
Parental Control rating and categories
Rating guidelines are provided by broadcasting stations.
Most television programs and television movies can be
blocked by TV Rating or Individual Categories. Movies
that have been shown at the theaters or direct-to-video
movies use the Movie Rating System (MPAA) only.
-42-
allows you to turn the Ping
router
that is not
Table of Contents
