Haier MT5311 Manual
  1. Manuals
  2. Brands
  3. Haier Manuals
  4. LED TV
  5. MT5311
  6. Manual

Haier MT5311 Manual

Hide thumbs
Table of Contents

Quick Links

MT5311 Training Documents
Table of Contents
loading

Related Manuals for Haier MT5311

Summary of Contents for Haier MT5311

  • Page 1 MT5311 Training Documents...

  • Page 2: Table Of Contents

    Introduction Controls ....................Connection Options ..............Universal Remote control ............Accessories ..................Install the Stand ................Install the Wall Mount ..............Installation Connecting to a DC input ..........Connecting to an Antenna input ........Choose Your Connection ............ Connecting to an AV Device..........Connecting to an Audio Device ........
  • Page 3 7. Operation Channel menu ............ Video menu ............Audio menu ............Function menu ........... Lock Menu ............Other Functions ..........Playing External Media ........Universal Remote Control Setting Up Your Remote Control ...... Remote Control Codes ........Maintenance Specication...
  • Page 8 1366 768 16.7M ATSC/NTSC m/mts/AC-3...
  • Page 10 T.MT5311.81B CN22 CNA2 CON2 CN18 CON1...
  • Page 11 T.MT5311.81B SPDIF LINE OUT MINI AV IN T.MT5311.81B ETHERENT...
  • Page 12 CNA2 CN18...
  • Page 13 Logic Level Control (Default For High Level) CON1 No Connection I2C SCL I2C SDA CN22...
  • Page 14 CON1 (4PIN/2.54): AMPLIFIER POWER SUPPLY CONNECTOR SYMBOL DESCRIPTION +24V DC Power Supply Ground Ground CON2 Audio Left Channel Output+ Audio Left Channel Output- Audio Right Channel Output- Audio Right Channel Output+...
  • Page 17 TC315B601...
  • Page 18 5.INTER FACE PIN CO N N E C TION 5. 1 T FT L C D MODULE CNF1 Con n ecto r Pin Assignment V C C supply:+12V Power V C C supply:+12V Power V C C Power supply:+12V V C C Power supply:+12V G N D Ground...
  • Page 19 Note (2) Low = Open or connect to GND: VE SA Format, High = Connect to +3.3V: J EIDA Format. Please refer to 5.5 LVDS INTE RFACE Note (3) Overdrive lookup table selection. The Overdrive lookup table should be selected in accordance to the frame rate to optimize image quality.

  • Page 26: Controls

    Press to turn on and off the TV. Receives IR signals from the remote control. 6 Remote Sensor Do not put anything near the sensor, which may block the remote control signal. 7 Power indicator Haier LED HDTV EN-4 -25-...

  • Page 27: Connection Options

    Video In Antenna Connect cable or antenna signals to the TV, either directly or through your cable box. Input Connect the audio L/R cables from the component Component source or an AV audio. AUDIO In EN-5 Haier LED HDTV -26-...

  • Page 28: Universal Remote Control

    Quickly select frequently used functions. N ENTER Accesses the highlighted item in the on-screen menu Clears all on-screen displays and returns to TV viewing from any O EXIT menu P REC Press to start the timeshift process. Haier LED HDTV EN-6 -27-...

  • Page 29: Accessories

    Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. product due to an increase in the internal temperature of the product. Install the product so the required distances shown in EN-7 Haier LED HDTV -28-...

  • Page 30: Installation

    If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter” . To install the antenna properly please contact a professional in your area. Haier LED HDTV EN-8 -29-...

  • Page 31: Choose Your Connection

    HDMI IN/DVI AUDIO IN When using an HDMI/DVI cable connection for video, the PC/DVI AUDIO IN jack is required for audio. Haier TVs support HDMI 1.4 (Audio Return Channel). However, the ARC(Audio Return Channel) function is only supported on HDMI 1 IN (ARC).

  • Page 32: Connecting To An Audio Device

    Connecting to an Audio Device Using an Audio(Analog) Cable Connections Amplifier/ DVD AUDIO OUT AUDIO IN Home Theater Audio Cable(Not Supplied) R-AUDIO-L Audio left= white Audio right= red AUDIO OUT When connecting, use the appropriate connector (sold separately). Haier LED HDTV EN-10 -31-...

  • Page 33: Connecting To A Pc

    74.250 VESA DMT- 67.500 60.000 148.500 1920 1080p DTV CEA Note The set may operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG(Sync On Green) is not supported. EN-11 Haier LED HDTV -32-...

  • Page 34: Connecting Headphones

    If you will not use the TV for an extended period of higher. time, it is recommended to disconnect the power Press the CH button to change the channel lower. plug from the wall power outlet. Haier LED HDTV EN-12 -33-...

  • Page 35: Channel Menu

    TV (NTSC, QAM modulated) channels available in or SAP appear. If other languages are available your Area. in the digital signal, select them with the MTS button. Press the EXIT button to save and return to TV EN-13 Haier LED HDTV -34-...

  • Page 36: Channel Skip

    1.Time shift time. The time delay to the current program ( English, Español or Français) time. 2.Current time Note 3.Channel name This function is only available in digital channel mode. Playback status: It shows the playback status (Play, Pause, Fast Forward, Rewind). Haier LED HDTV EN-14 -35-...

  • Page 37: Video Menu

    This will adjust the sharpness of fine details in the Phase : Adjust the phase of the pixel clock. picture. Clock : Adjust the clock of the input signal. Note Video adjustments are only available in the User mode. EN-15 Haier LED HDTV -36-...

  • Page 38: Audio Menu

    Live, Dance, Techno, Classic and Soft. Speaker SPDIF Type : To adjust the SPDIF type off, Dolby digital or PCM. AVL(Aut o Volume Leveler): This will reduce the di erences in volume level during commercials or when changing the channel. Haier LED HDTV EN-16 -37-...

  • Page 39: Function Menu

    CEC will work, perform a device discovery to see if there Press button to select 16:9, Normal, are any CEC supported devices connected to your TV. Cinema, Zoom. Note Only devices that support CEC will be compatible EN-17 Haier LED HDTV -38-...

  • Page 40: Blue Screen

    Power Off Timer Lock Timer 09:01:00PM when this option is selected. Move Back CC1: When CC1is displayed on the TV, it means CC mode is turned on. Auto Synchronization: Press the / button to Haier LED HDTV EN-18 -39-...

  • Page 41: Network Setup

    Font Size: To adjust the font size: Large, Small or Medium. Font Style: To adjust the font style: Style1, Style2, Style3, Style4, Style5, Style6 or Style7. Font Color: To adjust the font color: White, Green, EN-19 Haier LED HDTV -40-...
  • Page 42 For use when connecting your TV to a network that How to set up automatically requires a static IP address. Follow the steps below to set up your TV's network Press the MENU button and then use the Haier LED HDTV EN-20 -41-...

  • Page 43: Lock Menu

    Move Back C onnection methods: you can set up the wireless Enter the IP Address, Subnet Mask, Default network connection four ways. Haier Auto Gateway, Primary DNS and Secondary DNSentry values. Use the number buttons on your remote to manually.
  • Page 44 Channel Block. Children eight years and older Press button to select the item, press the General Programming, suitable for all ENTER button to set. audiences Parental Guidance Viewers 14 years and older Haier LED HDTV EN-22 -43-...
  • Page 45 A symbol “ ” will be displayed for each sub-rating. Channel Function While “ ” is selected, press ENTER button to go to a sub rating. To select a different Rating, press buttons and then repeat the process. AllowedRating BlockedRating Move Back EN-23 Haier LED HDTV -44-...

  • Page 46: Other Functions

    1. Editing a snippet by selecting in the dock and Connected TV pressing the Yellow button. 2. The snippet moves to the Second position and its You can monitor financial stocks, share photos with tile slides up to show the following help text: Haier LED HDTV EN-24 -45-...
  • Page 47 For instuctions on setting Owner PIN, refer to To install a widget, navigate to the detail screenand Administrative Controls. select Aaa Widget to My Profile and press the System Settings allowsyou to: ENTER button. The widget will be installed and EN-25 Haier LED HDTV -46-...
  • Page 48 TV screen when Highlight and focus on buttons in the you press the Yahoo! TV Key on the remote control. Yahoo! Connected TV user interface. What is a TV App bookmark? Haier LED HDTV EN-26 -47-...
  • Page 49 Enter your name to setup your profile. Highlight letters on the Choosing your location allows TV Apps keyboard and spell your name. to use localized content. Highlight your country. Select Save this name to create your profile. Select your country. EN-27 Haier LED HDTV -48-...
  • Page 50 The Profile Settings menu allows you to customize Focus is located in the leftmost region (the highlighted bookmark). and protect your profile. The dock scrolls bookmarks under this focal point. The System Settings Haier LED HDTV EN-28 -49-...
  • Page 51 Navigate to the bookmark and press ENTER to start app. your local and favorite weather locations. Press the YELLOW key. Press the GREEN key to display the Settings menu. Select the Delete Bookmark button and press ENTER. EN-29 Haier LED HDTV -50-...
  • Page 52 View the latest stock news with the Yahoo! Finance systems with which they are TV App. familiar. The flickr TV App enables slideshows of family and friends’ photos on your TV. Haier LED HDTV EN-30 -51-...
  • Page 53 Press the MENU button and then use the button to select the Function menu. Press / ENTER button and then use the button to select Network. EN-31 Haier LED HDTV -52-...
  • Page 54 Real-time captioning is normally done by professional Connecting to your PC through a reporters using a machine shorthand system and network computer for translation into English. Captioning is an e ective system for the hearing-impaired, and it Haier LED HDTV EN-32 -53-...

  • Page 55: Playing External Media

    Movie Text Setup Progressive)/ .PNG) Digital music: (.MP3(8~320kbps)) Delete Copy Paste Back Move Play Video: (.avi/.mpg/.mpeg/.vro/.vob/.ts coded with Press the ENTER button on the remote to display MPEG-1 or MPEG-2 standard) les. the sub menu. EN-33 Haier LED HDTV -54-...

  • Page 56: To Play Pictures

    Press the MEDIA.P button to exit the Media Play mode. mode. To play pictures Press the button to select Picture, then press the ENTER button in the Media Play menu. Use the buttons to select the desired Haier LED HDTV EN-34 -55-...

  • Page 57: To Play Music

    Do not remove USB device from the TV until Press the EXIT button to return to the previous you have exited the USB mode otherwise you menu. Press the MEDIA.P button to exit the Media may damage the USB device. Play mode. Haier LED HDTV EN-35 -56-...

  • Page 58: Universal Remote Control

    LED will blink 3 times. The save the current 3-digit code to memory and exit code will not be saved to memory. the manual programming mode. Return to step 3 reprogram the control. Automatic Scan Programming the Remote EN-36 Haier LED HDTV -57-...

  • Page 59: Setting Up Your Remote Control

    Pressing and holding the ENTER key and then press the Display mode POWER key for 3 seconds, the LED will blink 3 times and turn o , default Haier codeset (001) will be programmed Choose the device you wish to program. to the control.
  • Page 60 182 Philips Magnavox 042 045 089 090 096 100 Harvard 067 335 101 Havermy 183 Phonola 184 Pilot 060 076 331 349 350 352 102 Hello Kitty 103 Hewlett Packard 175 204 219 104 Hisense 250 370 375 EN-38 Haier LED HDTV -59-...
  • Page 61 017 018 019 020 074 075 099 100 104 106 109 111 113 115 120 123 146 151 173 227 354 Gradiente 270 325 258 Totevision 076 352 Greenhill 259 Trutech Grundig 260 Tuntex 333 362 Haier 261 TVS Harman/Kardon 224 347 262 Universal Hitachi 014 136 203 244 Haier LED HDTV EN-39 -60-...
  • Page 62 126 127 128 146 147 148 155 230 231 232 316 317 318 335 Harman/Kardon 136 Sungale Headquarter 137 Superscan 124 324 Hewlett Packard 138 SVA Hitachi 008 013 048 139 Sylvania 042 063 124 133 159 204 225 285 324 354 385 386 EN-40 Haier LED HDTV -61-...
  • Page 63 008 013 028 030 031 112 120 MegaCable 135 Sharp 022 023 052 090 096 Memorex 024 044 136 Shogun 012 029 Motorola 000 003 005 008 039 040 042 043 137 Singer Movie Time 138 Sonic Blue 109 127 Multitech Haier LED HDTV EN-41 -62-...

  • Page 64: Remote Control Codes

    21.1/9.6 792x200x565 mm Here’s a great way to keep the dust o your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing EN-42 Haier LED HDTV -63-...
  • Page 65 -64-...
  • Page 66 MMBT3904(f 350MHz) 470uF-10V -±20%-6.3×11-105 - 1uF-0603-Y5V-+80%-20%-10V 0.1uF-0402-Y5V-+80%-20%-16V 100uF-16V-±20%-5×11-105 BL_ON/OFF RL13 R340 LO = > POWER_ON HI = > POWER_OFF +5VSB 3V3SB LC1117CLTR33 SPR1 +5VSB T.MT5311.81B 11411 NC/110ohm-0402-±1%-1/16W CEP6 100uF-16V-±20%-5×11-105 0ohm-0402-±5%-1/16W 0.1uF-0402-Y5V-+80%-20%-16V MARK MARK MARK MARK MARK MARK MARK MARK BOARD NAME SPR3 1Kohm-0402-±5%-1/16W...
  • Page 67 MMBT3904(f 350MHz) DVSS DVDD3V3 RM18 10Kohm-0402-±5%-1/16W DVSS RM16 RM19 7K5ohm-0402-±5%-1/16W DVSS MMBT3904(f 350MHz) +5VSB DVSS 4K7ohm-0402-±5%-1/16W MT5311 LO = > WRITE RM13 RM14 RM15 I2C ADDRESS "A0" R1779 4K7ohm-0402-±5%-1/16W 1Kohm-0402-±5%-1/16W 4K7ohm-0402-±5%-1/16W RW22 ORESET# HI = > WP 3.3V IO Pow er 510ohm-0402-±5%-1/16W...
  • Page 68 CM24 AOBCK 100uF-16V-±20%-5×11-105 AOLRCK 0.1uF-0402-Y5V-+80%-20%-16V AOMCLK 100uF-16V-±20%-5×11-105 AOSDATA4 NC/110ohm-0402-±1%-1/16W AOSDATA3 0.1uF-0402-Y5V-+80%-20%-16V 0ohm-0402-±5%-1/16W AOSDATA2 1uF-0603-Y5V-+80%-20%-10V AOSDATA1 SPR8 AOSDATA1 AOSDATA0 MT5311 BP10 IR Transmitter SPDIF_OUT Coaxial 33ohm-0402-±5%-1/16W 0.1uF-0402-Y5V-+80%-20%-16V GQ-08 OPTICAL Audio Output RA19 SCT2 Audio Out +12V OPAV120 OPA2VREF CA10 10Kohm-0402-±5%-1/16W 100pF-0402-NPO-±5%-50V 100uF-16V-±20%-5×11-105...
  • Page 69 AMP_PWR 0.1uF-0603-Y5V-+80%-20%-50V 10ohm-0402-±5%-1/16W C227 0.1uF-0603-Y5V-+80%-20%-50V 10uF-0805-Y5V-+80%-20%-10V 470uF-35V -±20%-10×13 105 0.1uF-0402-Y5V-+80%-20%-16V 0.1uF-0603-Y5V-+80%-20%-50V DVDD3V3 DVDD3V3 CON2 C218 R267 AMP-Lout+ C217 R266 C264 0.1uF-0603-Y5V-+80%-20%-50V 0ohm-0402-±5%-1/16W AMP-Lout- C260 470uF-35V -±20%-10×13 105 CA41 CA39 10uF-0805-Y5V-+80%-20%-10V AMP-Rout- 0.1uF-0603-Y5V-+80%-20%-50V 0.1uF-0402-Y5V-+80%-20%-16V AMP-Rout+ C169 C186 4PIN-2.54-D-H-G C167 NC/5pF-0402-NPO-±5%-50V NC/5pF-0402-NPO-±5%-50V 0.1uF-0603-X7R-±10%-50V C168 NC/5pF-0402-NPO-±5%-50V...
  • Page 70 10Kohm-0402-±5%-1/16W CT19 CVBS_COM FS_VDAC 0.047uF-0402-X7R-±10%-16V VDAC_OUT1 AVDD3V3 MONITOR_OUT RM41 AVDD33_CVBS VDAC_OUT2 AVSS33_CVBS AA14 AVDD3V3 AVDD33_VDAC AVSS33_VDAC 560ohm-0402-±1%-1/16W MT5311 Close to CONN. Close to IC YPBPR SOY1 1500pF-0402-X7R-±10%-50V YPbPr1 Video Input(Horizotal) VGA.PIN11 UTX#' Y_IN_1 UTX# 18ohm-0402-±5%-1/16W 100ohm-0402-±5%-1/16W Y_IN_1 VGA.PIN4 URX#' 56ohm-0402-±5%-1/16W 100ohm-0402-±5%-1/16W...
  • Page 71 AOCKP AOCKP AOCKN AOCKN AO3P AO3P AO3N AO3N AO4P AO4P AO4N AO4N AO5P AO5N EQUAL LENGTH andDIFFERENTIALIMPEDANCE 90ohm MT5311 BP17 Analog Power USB_DP0 ( 180 mA ) AVDD3V3 USB_DM0 USB_5V POWER ( ?? mA ) AVDD3V3 CM32 D124 D125 0.1uF-0402-Y5V-+80%-20%-16V...
  • Page 72 CAPs for DRAM IO Power ( Close to DDR#2 ) 0.1uF-0402-Y5V-+80%-20%-16V 0.1uF-0402-Y5V-+80%-20%-16V 0.1uF-0402-Y5V-+80%-20%-16V DDRV DDRV 0.1uF-0402-Y5V-+80%-20%-16V 10uF-0805-X5R-±10%-6.3V 10uF-0805-X5R-±10%-6.3V 0.1uF-0402-Y5V-+80%-20%-16V 2_DDRV_C9 CAPs for DRAM IO Power ( Close to MT5311 ) Damping for DDR#1 ADDR/CMD 10uF-0805-X5R-±10%-6.3V CM58 CD12 CM61 CM39 CD10 CD11 CM60 CD14...
  • Page 73 5K1ohm-0402-±5%-1/16W ETRXCLK_C50M_O ETRXCLK R109 5K1ohm-0402-±5%-1/16W 10Kohm-0402-±5%-1/16W PHY_REFCLK ADIN0_SRV ETPHYCLK R110 AA11 5K1ohm-0402-±5%-1/16W 10Kohm-0402-±5%-1/16W ETMDIO ADIN1_SRV ETMDIO ADIN2 ETMDC ADIN2_SRV ETMDC LINKED IN 10BT/ACT(BLINKING) ADIN3 ADIN3_SRV R115 10Kohm-0402-±5%-1/16W ADIN4_SRV OPWM2 R113 10Kohm-0402-±5%-1/16W ADIN5_SRV OPWM1 BL_DIMMING OPWM0 LINKED IN 100BT/ACT(BLINKING) MT5311 -72-...
  • Page 74 SCL _ 0 SCL _ 1 SCL1 SCL2 SDA_ 0 SDA_ 1 SDA1 SDA2 HPD0 HPD1 HPD1 HPD2 RX0 _ 5 V RX1 _ 5 V POW1 POW2 CEC# PO W_ SINK POW_SINK DDCBUF_ EN HPD_ SINK DDCBUF_EN HPD_SINK G ND SDA_ SINK SDA_SINK CB24...
  • Page 75 1uF-0603-Y5V-+80%-20%-10V +5V_TUNER 4K7ohm-0402-±5%-1/16W 4K7ohm-0402-±5%-1/16W RF-AGC Near Tuner +5V_TUNER tuner_scl_T VCC-5V R2006 tuner_scl_T MT5112_TUNER_CLK R2007 tuner_sda_T tuner_sda_T MT5112_TUNER_DATA RFAGC 100ohm-0402-±5%-1/16W BTL30V +5V_TUNER 100ohm-0402-±5%-1/16W tuner_sda_T VCC5V 27pF-0402-NPO-±5%-50V tuner_scl_T 27pF-0402-NPO-±5%-50V 0ohm-0402-±5%-1/16W IF-AIF1 IF_T_AGC IF-AGC DFAT_IN- IFA OUT IFD1-OUT DFAT_IN+ ZR11 IF_T_AGC IF_AGC_DEMOD IFD2-OUT DVT-8C/T41FOHS IF_T_AGC 0.01uF-0402-X7R-±10%-50V...
  • Page 76 DVDD33 4K7ohm-0402-±5%-1/16W R2008 R2009 4K7ohm-0402-±5%-1/16W MT5112_IF_AGC IF_AGC_DEMOD 10Kohm-0402-±5%-1/16W 0.047uF-0402-X7R-±10%-16V +3V3 Close to MT5112 MT5112EE/LQFP100 NC/4K7ohm-0402-±5%-1/16W FAT_IN- DEMOD_RST 0ohm-0603-±5%-1/10W GPIO1(P1.1) 0.01uF-0402-X7R-±10%-50V RESET_ NC/10uF-0805-X5R-±10%-10V C803 HOST_SCL AVSS1 HOST_CLK NC/SDCL1608CR22JT(F) NC/47pF-0402-NPO-±5%-50V AVDD1 AVDD1 DGND12 FAT_IN+ DVDD12 DVDD12 HOST_SDA HOST_DATA 0ohm-0603-±5%-1/10W DGND33 0.01uF-0402-X7R-±10%-50V 0.1uF-0402-Y5V-+80%-20%-16V DVDD33 DVDD33 0.1uF-0402-Y5V-+80%-20%-16V...
  • Page 77 mtk5311 Remote boot; U disk light will flash until the lights do not flash U disk upgrade is successful 4 ,Then enter the factory reset menu, turn it off -76-...
  • Page 78 -77-...
  • Page 79 trouble-shooting 1. Power Supply Trouble Check if the pin No.1 of CNA1 is 5VSB Check if the pin No.2 of UP2 Change the power board is 3.3VSB Check if the pin No.7 and No.8 of CNA1 Check the is 5V, and if No.10 is 12V circuit of Check if the 1.2V Check if the voltage...
  • Page 80 3. 3. Display Trouble (Exceptional screen) Exceptional screen Check if the cable is correct and connected tightly. Check if the voltage on pin No. 1,2,3 of CN18 is OK Check the voltage for CN3 is panel VCC If the software If the software on board is OK Check the...
  • Page 81 4. 4. Display Trouble (White screen) White screen Check the power supply for panel supply for panel Check the output Check if Q70(3407) is OK LVDS signal of UM1 Change UM3 Change the LCD panel Change the No.92 of UM1/5311 or flash Change CN3 Or the cable to panel...
  • Page 82 5. 5. Display Trouble (Black screen) Black screen Check if voltage on pin3 of CN5(BLON Signal) is high level Is inverter power is normal? Check the circuit of BLON Check the voltage on pin No.1,2 of CN5 Change inverter from QL2 to UM1 (pin N E25) No.E25) -81-...
  • Page 83 6. Audio Trouble 6. Audio Trouble no sound no sound No Sound Check if there is audio signal input Check if the set of volume Mute is normal volume, Mute is normal Check signal output of C0N1 Check if power supply of pin No.2,3,34,35of U38 is 24V Check if pin No 25 of U38 is 0V Check if pin No.25 of U38 is 0V...
  • Page 84 7. Function Trouble 7. Function Trouble TV video TV video TV cannot scan any channel/Picture whether the external RF input signal is normal Check if pin No.7of T1(DVT-8C/T41F) is normal Check if pin No.6,7 of T1 has I2C data Check if pin No. 10,11 of T1 has IF signal to U71 10 11 f 1 Check if pin No.9 of T1 has voltage(1.8 ~3.3V)
  • Page 85 8.Function Trouble 8.Function Trouble (PC) (PC) Under PC channel Picture is Image color fade No signal not in center Stabilization Check the R G B input signal Check the R.G.B input signal Check if VS HS signal Check if VS,HS signal is Ruled and stable for UM1(pin No.218,220,222) Check the circuit of VS.HS...
  • Page 86 9. Function Trouble 9. Function Trouble (HDMI) (HDMI) HDMI have no signal If another Four HDMI have no signal Check the circuit from Check the power circuit of HDMI terminal to UM1 and I2C control U4/PS421 signal Check the circuit from U4 or HDMI terminal Check the circuit HDMI terminals to UM1...
  • Page 87 10. Function Trouble 10. Function Trouble ( ( YPBPR,CVBS,LINE OUT) ) CVBS LINE OUT YPBPR have no signal have no sound have no signal Check the signal input on pin No.AB17 of UM1 Check if audio output on Check the signal between UM1 No.AB11 and No.AE11 pin No.1,7 of U70 is OK Check the power...
  • Page 88 -87-...
  • Page 89 -88-...
  • Page 90 -89-...
  • Page 91 -90-...
  • Page 92 Upgrade Software: 1, Copy the software ino the root directory of the U disk; 2, Put your disk inserted into the TV set, then connect the tv to power supply. 3, The indicator lamp will flash for about 1 min. 4, Until the indicator lamp stop flashing.It means upgrade is succesful 5, Then factory reset.

Table of Contents