Connecting External Output Devices; Connecting To An External Computer Monitor - Epson BrightLink 697Ui User Manual
Wireless full hd 3lcd ultra short-throw interactive display
Hide thumbs
Also See for BrightLink 697Ui:
- Setup manual (43 pages) ,
- Installation manual (90 pages) ,
- Installation manual (97 pages)
Table of Contents
2. Connect the other end of the cable to the projector's Audio port that corresponds to the port you are
using for video.
Parent topic:
Connecting External Output Devices
See these sections to connect the projector to external output devices.
Connecting to an External Computer Monitor
Connecting to an External DVI Monitor or Projector
Connecting to External Speakers
Parent topic:
Connecting to an External Computer Monitor
If you connected a computer to the projector's Computer port, you can also connect an external monitor
to the projector. This lets you see your presentation on the external monitor even when the projected
image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Communication On as the Standby Mode setting and Always On as the A/V Output setting in the
projector's menu system.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1. Make sure your computer is connected to the projector's Computer port.
Connecting to Video Sources
Projector Connections
52
Table of Contents
