Controlling Computer Features From A Projected Screen (Pc Interactive Mode) - Epson BrightLink 697Ui User Manual
Wireless full hd 3lcd ultra short-throw interactive display
Hide thumbs
Also See for BrightLink 697Ui:
- Setup manual (43 pages) ,
- Installation manual (90 pages) ,
- Installation manual (97 pages)
Table of Contents
5. To close the main toolbar, select the
Note: If you want to hide the toolbar automatically after drawing, select the
the toolbar.
6. To show or hide the projection control toolbar, select the
Note: You can also show or hide the projection control toolbar by setting the Extended > Display >
Projector Control setting to On or Off.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Controlling Computer Features from a Projected Screen (PC Interactive Mode)
You can navigate, select, and interact with your computer programs from the projected screen using the
interactive pens or your finger just as you would a mouse.
Note: Mac users need to install the Easy Interactive Driver before using PC Interactive mode. Go to
epson.com/support
1. Connect the projector to your computer using a USB cable.
Note: When using the control pad, you need connect the projector, the control pad, and your
computer using USB cables. If you are connecting over a network, you do not need a USB cable.
2. Turn on your projector and project your computer screen.
Interactive Modes
(U.S.) or
epson.ca/support
icon at the bottom of the toolbar.
or
(Canada) and select your projector.
183
icon at the bottom of
arrow.
Table of Contents
