Table of Contents
Reflector Replacement
42.9686.0120
Parts:
Repair Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove the Color/Dimmer/Strobe Assembly. See
Replacement" on page 31
Step 3. As shown in
Step 4. Carefully remove the UV/Reflector assembly.
Step 5. Remove the springs from the reflector clamp and remove the reflector.
Step 6. Replace the reflector and UV/Reflector assembly in reverse order. Make sure the mark on
the reflector lines up with the mark on the top-left reflector support; see the illustration in
Figure
02.96 86.001 0 A
M
AINTENANCE
for complete instructions.
Figure
2-10, remove four 4-40 x 1 3/8" PPZ screws.
2-10.
P
: R
ROCEDURES
EFLECTOR
"Color/Dimmer/Strobe Assembly
2
R
EPLACEMENT
35
Table of Contents
Troubleshooting
