Table of Contents
(3)Restitching methods
Restitching can be carried out using the previously explained halt function.
If the operation is halted due to needle thread breakage, etc., set the needle at the UP position, and then using the
forward jog/reverse jog icons, move to the position where the thread broke. Tie the needle thread, etc., and restart
stitching by pressing the start switch.
Caution
on the start switch while threading. Doing so initiates machine rotation, resulting in an
extremely dangerous situation. To ensure that the start switch is not turned on during
threading, take measures such as moving the start switch away from your feet.
8.Adjusting the Liquid Crystal Contrast
(1)Entering the function mode
►Press
menu mode.
►Press
(2)Entering the screen mode
►Press
screen mode.
(3)Adjustment of LCD contrast
►Set the liquid crystal contrast value using the up and down
arrow icons.
►After setting the value, press the
apply the value.
►Back to Standard screen, then contrast setting is completed.
If the needle must be thread while the power is ON, do not turn
on the standard screen, and open the
on the function mode menu, and open the
[Enter] icon to
[3] - 6
- Quick Links:
- Screen Configuration
- E-***] Error Code
Hide quick links:
Table of Contents
