Table of Contents
21.Modifying material step
[example] In the pattern data like a figure below, it is modified that the presser foot will be raised by
1.6 mm between A point and B point.
（The presser foot correction value is already set to 3.0 mm）
Detailed operation
(1)Selection material step modification
►Enter the pattern modification mode (Refer to P.[11]-1)
►Press the stitch modification
material step modification
►Press
(2)Moving to designated stitch position (A point)
►Move X-Y table to A point by pressing
►After move to the position, press
(3)Setting correction value
►Change material thicknes to [1.6] by pressing up and down
arrow.
►After setting, press
then, press the
.
.
.
.
.
[11] - 43
- Quick Links:
- Screen Configuration
- E-***] Error Code
Hide quick links:
Table of Contents
