Making Connections for UTP Cameras Making Connections for Fiber Optic Cameras Making Connections for Network Cameras Camera Lens Adjustment Model Numbers Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 5
For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%, or 28 VAC. User supplied wiring must comply with local electrical Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras...
Page 6
Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc.
NOTICE! This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or protection of property. Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
140 feet, in accordance with NEC800 (CEC Section 60). CAUTION! Class I Laser Product Invisible laser radiation when open. Avoid exposure to beam. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 9
This device is intended for use in public areas only. U.S. federal law strictly prohibits surreptitious recording of oral communications. Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical...
Page 10
Power disconnect - Units have power supplied whenever the power cord is inserted into the power source. The power cord is the main power disconnect for all units. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 11
Network Voltage (TNV) circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems,
and a procedure to back up all analog and digital information.
Page 12
(modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes: F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 13
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras...
Page 14
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Copyright This user guide is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Page 15
The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.
| Safety KBN & KBE Series Cameras Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: [email protected]...
Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service.
| Description KBN & KBE Series Cameras Description The KBE and KBN Series are complete camera packages that include a camera and lens pre-wired into a housing. A feed through wall mount is also provided, as well as a sunshield on outdoor packages.
24 VAC Black 24 VAC Bosch recommends that you connect the incoming 24 VAC power cables to the camera cable using wire connectors inside a junction box. For additional information, see the Installation Manuals included in the Instruction Booklet Packet.
Figure 5.1 Cable Routing Options Make the power connections as detailed in Section Power Connections, page 19. Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
For Ethernet connections, proceed to Step 3. – For power cable connections, refer to Section Power Connections, page 19, then skip to Step 4. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 23
Loosen the top two screws (item 2 below) on the rear of the housing. These screws are captive and will not Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras...
Page 24
Turn over the housing and loosen the NPT fitting from the foot of the housing that contains the UTP Video/ F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 25
Refer to the LTC 9215/00S Installation Manual for tightening tolerances. WARNING! If connecting to a PoE LAN switch, remove the separate AC power connections from the camera. Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Video BNC connector. Connect a coax cable from the setup monitor to the Video terminal on the back of the camera. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 27
(if using an analog camera). Slide the housing cover back over the camera and tighten the two captive screws on the back of the housing. Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras...
Attach the end of the string to the unshielded twisted pair (UTP) video cable and pull it through the mount and the F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 29
UTP cable before tightening the fitting to prevent slippage. Attach the housing to the mount in accordance with the KBE and KBN Series Instruction Manual. Wiring Do’s Use point to point unshielded twisted pair wire, 24 AWG or thicker, stranded or solid, Category 2, 3, 4, or 5.
Note that a fitting is not used in the mounting foot when a terminated fiber optic cable is used. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 31
ST/RJ-45 connector Fiber optic video cable/UTP/CAT5 cable Connect the fiber optic cable to the fiber optic video connector on the fiber optic transmitter. Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Page 32
A split rubber sleeve (not supplied) may be used for this purpose. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
Figure 6.5 Seal the Hole in the Housing Foot Reference Description Seal with RTV Attach the housing to the mount in accordance with the KBE and KBN Series Instruction Manual. Making Connections for Network Cameras Follow the steps below to make connections for IP-based cameras ("N" suffix cameras).
Page 34
Attach the end of the string to the Cat5/Cat6 cable and pull it through the mount and the unused hole in the mounting foot of the camera housing. See Figure 6.3. F.01U.215.198 | 4.0 | 2011.01 Installation Manual Bosch Security Systems, Inc. Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...
If custom setup is required, see the camera Installation Instructions included in the Instruction Booklet Packet. Figure 6.8 Removing the Bracket Bosch Security Systems, Inc. Installation Manual F.01U.215.198 | 4.0 | 2011.01 Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]...