System board
Removing system board
1
Follow the procedure in
1
If your computer is shipped with a WWAN card, then the removal of a SIM card tray is a requirement.
2
Remove the:
a
SIM card tray
b
base cover
c
battery
d
memory module
e
PCIe SSD
f
WLAN card
g
WWAN card
h
heat sink assembly
i
coin cell battery
3
To disconnect the eDP cable:
a
Un route the WLAN and WWAN cables from the routing channels [1].
b Remove the M2.0 x 3.0 screw that secures the eDP cable [2].
c
Remove the eDP cable bracket [3].
d Disconnect the eDP cable from the system board [4].
e
Lift the tape that secures the eDP cable to the system board [5].
Before working inside your
computer.
Removing and installing components
31