LED board
Removing LED board
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
NOTE:
3
To remove the LED board:
a
Disconnect the LED cable from the LED board [1].
b Unroute the LED cable from the routing channel [2].
c
Remove the M2.0 x 2.5 screw that secures the LED board to the computer [3]
d Lift the LED board from the computer [4].
Installing LED board
1
Insert the LED board into the slot on the computer.
2
Tighten the M2.0 x 2.5screw to secure the LED board.
3
Route the LED cable through the routing channel.
4
Connect the LED cable to the LED board.
22
Removing and installing components
Before working inside your
You need not remove the battery but instead disconnect the battery cable from the system board.
computer.