1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. lifebook S6311
  6. User manual

Fujitsu lifebook S6311 User Manual

Hide thumbs
Table of Contents

Quick Links

Copyright
Fujitsu Limited has made every effort to ensure
the accuracy and completeness of this document.
However, as ongoing development efforts are
continually improving the capabilities of our
products, we cannot guarantee the accuracy of
the contents of this document. We disclaim
liability for errors, omissions or future changes.
LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS and Windows
NT are registered trademarks of the Microsoft
Corporation of the United States in the United
States and other countries.
Phoenix is a registered trademark of Phoenix
Technologies Corporation of the United States.
Copyright© 1981-1999 Microsoft Corporation, All
rights reserved.
Copyright© 1999 Phoenix Technologies, Ltd., All
rights reserved.
LB_GAURA (Intro) EN
Other product names are trademarks or
registered trademarks of their respective
companies.
© Copyright 2006 Fujitsu Limited. All rights
reserved. No part of this publication may be
copied, reproduced or translated, without the
prior written consent of Fujitsu Limited. No part
of this publication may be stored or transmitted
in any electronic form without the written consent
of Fujitsu Limited.
Operations are subject to the following two
conditions:
(1) This device may not be allowed to cause
(2) This device must accept any interference
Website: www.pc-ap.fujitsu.com
DECLARATION OF CONFORMITY
according to FCC Part 15
1
C o py r i g h t
harmful interference.
received, including interference that may
cause undesired operation.
13/11/06, 05:32 pm
i
Table of Contents
loading

Related Manuals for Fujitsu lifebook S6311

Summary of Contents for Fujitsu lifebook S6311

  • Page 1 C o py r i g h t Other product names are trademarks or Copyright registered trademarks of their respective Fujitsu Limited has made every effort to ensure companies. the accuracy and completeness of this document. However, as ongoing development efforts are ©...

  • Page 2: Important Safety Instructions

    10. Never push objects of any kind into this IMPORTANT SAFETY product through cabinet slots as they may INSTRUCTIONS touch dangerous voltage points that could 1. Read these instructions carefully. Save these result in a fire or electric shock. Never spill instructions for future reference.
  • Page 3 14. Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, BS1363, ASTA, SS145 certified, rated 10A 250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).

  • Page 4: Fcc Notices

    1. The telephone number to which the Changes or modification not expressly notebook is connected. approved by Fujitsu could void this user’s authority to operate the equipment. 2. The Ringer Equivalence Number (REN) for this equipment.
  • Page 5 • Hotel, motel or apartment lobbies. facility. Any repairs or alterations not expressly • Stores where telephones are used by patrons approved by Fujitsu or any equipment failures to order merchandise. may give the telecommunication company cause to request the user to disconnect the equipment •...
  • Page 6 For Authorized Repair Technicians Only The Load Number assigned to each telephone terminal device denotes the percentage of the total load to be connected to a telephone loop or circuit which is used by the device to prevent For continued protection against risk of overloading.
  • Page 7 If you send this product to Fujitsu, or any of its industrial use. affiliates, suppliers, service providers or resellers for repair, Fujitsu does not guarantee the data This product is not designed for or intended for integrity.
  • Page 8 Call Attempts/Retries: AUSTRALIAN WARNINGS WARNING Applications software shall be configured so that no more than 3 attempts are made to establish a FOR SAFETY REASONS, ONLY CONNECT connection to a given number (Note: if the modem EQUIPMENT WITH A TELECOMMUNICA- can detect service tones, up to 10 attempts can TIONS COMPLIANCE LABEL.
  • Page 9 C o py r i g h t Some parameters required for compliance with NEW ZEALAND WARNINGS Telecom’s Telepermit requirements are The grant of a Telepermit for any item of terminal dependent on the equipment (PC) associated equipment indicates only that Telecom has with this device.
  • Page 10 B. If you are located in New Zealand NOTE: Modem setting in Windows 1. Click start select Control panel select "Phone and Modem Options". 2. Double click New Location. A. If you are located in Australia 3. Choose "New Zealand" in Country/region 1.

  • Page 11: Table Of Contents

    Ta b l e o f C o n t e n t s Table of Contents NAMES OF THE PARTS POWER SOURCES ......17 AND THEIR FUNCTIONS ..... 1 Connecting the Power Adapter ....17 Exterior features: Front/Top view of the Power On .............

  • Page 12: Names Of The Parts And Their Functions

    G e t t i n g t o K n o w Yo u r L i fe B o o k (This picture is for illustration purpose only and may look different from the actual unit) NAMES OF THE PARTS AND THEIR FUNCTIONS The phenomena described below are Exterior features: Front/Top...
  • Page 13 2. Status Indicator LED/LCD 9. Wireless LAN/ Bluetooth* ON/OFF Switch The switch allows you to turn on and off the This indicator displays operating status Wireless LAN/ Bluetooth communications. symbols that correspond to specific components of your notebook. Slide the switch to the right to turn it on, or slide the switch to the left to turn it off.

  • Page 14: Exterior Features: Side View

    G e t t i n g t o K n o w Yo u r L i fe B o o k (This picture is for illustration purpose only and may look different from the actual unit) Exterior features: Side view can be changed up to 4 times, after which it will be locked so that the DVD optical Right view of the notebook...
  • Page 15 (This picture is for illustration purpose only and may look different from the actual unit) Left view of the notebook 6. HDA-In It allows jack sensing of the following audio Your notebook is equipped with high defintion input devices. audio (HDA) jacks. •...

  • Page 16: Exterior Features: Top/Bottom View Of The Notebook

    G e t t i n g t o K n o w Yo u r L i fe B o o k Exterior features: Top/Bottom view of the notebook 1. Built-in Wireless LAN* 1. Wireless LAN/ Bluetooth* ON/OFF Switch The location of the dual Wireless LAN You can use this switch to turn on or off the antenna.

  • Page 17: Exterior Features: Rear View Of The Notebook

    (This picture is for illustration purpose only and may look different from the actual unit) Exterior features: Rear view of the notebook 1. USB 2.0 Ports The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 devices transfer data at up to 480Mbps and is backward compatible with USB 1.1 devices, which transfer data up to 12Mbps.

  • Page 18: Common Port Replicator

    G e t t i n g t o K n o w Yo u r L i fe B o o k COMMON PORT REPLICATOR To lock only the port replicator without locking the docked notebook, please use anti-theft lock slot 2 with an optional The port replicator is an optional item.
  • Page 19 Port replicator front panel 11. Lan (RJ-45) Jack The LAN port allows you to connect a LAN (RJ-45). The following is a brief description of the port Note that when your notebook is docked on replicator front panel components. the port replicator, the LAN port on the LifeBook is not accessibale.

  • Page 20: Dedicated Port Replicator

    G e t t i n g t o K n o w Yo u r L i fe B o o k DEDICATED PORT 5. Digital Video Interface (DVI-D) The DVI-D port allows you to connect a flat- REPLICATOR panel LCD display or television that is equipped with a DVI-D port for ultra-crisp digital images and graphics.
  • Page 21 2. Port Replicator Interface Port replicator left side view This interface connects the port replicator to your notebook. 1. DC Power Jack The DC power jack allows you to plug in the AC Adaptor to power on your notebook. Port replicator right side view 2.

  • Page 22: Status Indicator Lcd

    G e t t i n g t o K n o w Yo u r L i fe B o o k (For illustration purposes only. Indicators may not appear at the same time. Their appearances depend on the notebook configurations and operating situations.) STATUS INDICATOR LCD* 5.

  • Page 23: Card Slot Access Indicator

    8. Card Slot Access Indicator ( This indicator turns on if an application tries to access a Card slot regardless whether a Card is intalled in the slot. 9. Num Lock Indicator ( This indicator lights up when the keyboard is locked in Num Lock mode.

  • Page 24: Operating Status Indicator Led

    G e t t i n g t o K n o w Yo u r L i fe B o o k OPERATING STATUS 2. Built-in Battery Pack Level Indicator Lamp ( INDICATOR LED* This lamp indicates remaining level of the built-in battery pack.

  • Page 25: Running The Notebook On Its Battery

    RUNNING THE NOTEBOOK ON ITS BATTERY When the batter y is 90% or more Recharging the battery charged, it cannot be recharged even if the AC adapter is connected. The battery can be recharged when its power level 1. Connect the AC adapter to your notebook. (i.e.

  • Page 26: Running The Notebook On Its Battery

    G e t t i n g t o K n o w Yo u r L i fe B o o k Running the notebook on its Checking the power level of battery the battery This section describes the steps to run the When the notebook is turned on or when the notebook on its internal standard battery.

  • Page 27: Low Battery Condition

    Battery failure alert Low battery condition When the battery is discharged to a very low Indicates that the battery cannot be level, the battery level indicator on the status charged properly. indicator LCD blinks ( ). If it blinks, connect the AC adapter to your notebook immediately to recharge the battery.

  • Page 28: Power Sources

    G e t t i n g S t a r t e d w i t h yo u r L i f e B o o k N o t e b o o k DC Power Jack DC Output Cable AC Adapter AC Cable...

  • Page 29: Power On

    Power on Power off Power/Suspend/Resume button Before turning off the power, check that the Hard Drive, Optical Disk access and PC Card You can use the Power/Suspend/Resume button indicators are all Off. If you power off the notebook to turn on your notebook. Once you have when it is acessing the disk or PC Card, data connected an AC adapter to the notebook or may be lost or corrupted.To power off the...

  • Page 30: Changing The Internal Battery Pack

    U s e r - I n s t a l l a b l e Fe a t u r e s CHANGING THE INTERNAL BATTERY PACK Before changing the internal battery pack, turn off the notebook and disconnect the AC adapter from it.

  • Page 31: Adding Memory

    DDR2 memory modules of the same capacity and specification. We strongly recommend you to use Memory only Fujitsu approved memory modules. compartment cover Installing memory module To install memory, perform these steps.
  • Page 32 U s e r - I n s t a l l a b l e Fe a t u r e s 4. Install the memory module Insert the memory module into the slot with the notch in the memory module aligned with To install or remove a memory module, the projection on the connector, and push hold it by the edge and be careful not to...

  • Page 33: Checking The Memory Capacity

    Checking the memory 5. Click OK. capacity If the numeric value displayed does not agree with the memory capacity of your notebook, check the newly installed If the memory is not installed correctly, memory module. an error message "Expansion memory error"...
  • Page 34 U s e r - I n s t a l l a b l e Fe a t u r e s 4. Remove the memory module. 6. Attach the memory compartment cover. Displace the hook on each side from the Attach the cover removed in step 3.

  • Page 35: Using Fingerprint Authentication

    USING FINGERPRINT You can log on AUTHENTICATION* to Windows or recover from the power-saving status by With fingerprint authentication, you can omit authenticating entering a user name and a password by just the fingerprints sliding your finger onto the fingerprint sensor at that have been the time of logging in homepages or logging on It is unnecessary to input...

  • Page 36: Configuration Of Registration Information

    U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n Configuration of registration Register log-in information information on homepages Registration information is set up in the following To log into homepages of which security is set configuration.
  • Page 37 • When a screen specific for entering log-in • When directly registering log-in information information is indicated. to homepage. Do not press the “OK” button. Click the area where a user name and a password are entered. 3. Right-click on the OmniPass icon •...
  • Page 38 U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n 5. Enter the name of log-in information from 2. Click on “Vault management.” the “OmniPass-Friendly Name.

  • Page 39: Log Into Homepages Using Fingerprint Authentication

    4. Select the user name, and click on Log into homepages using “Manage Passwords.” fingerprint authentication The “Password management” window will appear. With fingerprint authentication, just by sliding your finger onto the fingerprint sensor, you can log into the homepage where security is set. Register log-in information on homepages 1.

  • Page 40: Change Registration Information

    U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n • Fingerprint Change registration The number of fingerprints to be registered information can be added.
  • Page 41 3. Slide any finger which fingerprint has been registered onto the fingerprint sensor. When authentication of fingerprints is succeeded, the “User delete confirmation” window will appear. 2. Enter the same password for logging on to Windows and click on “Next.” 4.
  • Page 42 U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n 3. Select a finger which fingerprint is 5. When the message “Recommend to registered, and click on “Next.”...

  • Page 43: Save/Read Registration Information

    3. Click on “Export of OmniPass user Save/Read registration profile.” information The “Authentication of user export” window will appear. Information such as user names and passwords, fingerprints and log-in information for homepages that have once been registered can be saved altogether.
  • Page 44 U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n 5. Enter the name of the registration 1. Click on “Start,” “All programs,” “Softex” information to save, and click on “Save.”...
  • Page 45 4. Select the registration information that has been saved and click on “Open.” The “OmniPass import user” window will How to confirm domain appear. “Domain” for setting the registration information for fingerprint authentication can be checked by the following procedure. 1.

  • Page 46: Setup Window

    U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n Setup window User settings • Audio Setting for fingerprint authentication can be Sound coming from the computer when changed with “OmniPass control center.”...

  • Page 47: System Settings

    • Password management System settings The user name and password for logging in • Starting option homepages using fingerprint authentication are managed. To change log- Fingerprint authentication can be used for in information, delete log-in information once, logging on to Windows or you can terminate then reregister it.

  • Page 48: Version Information

    U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n • File & Folder encryption Scrolling In order to encrypt a file or folder, click on The Fingerprint sensor now comes with a the folder or file to encrypt, right click on your scrolling function.

  • Page 49: Troubleshooting

    8. If you have tried the solutions suggested in TROUBLESHOOTING the Troubleshooting Table without success, Your Fujitsu LifeBook notebook is sturdy and contact your support representative. subject to few problems in the field. However, you may encounter simple setup or operating...

  • Page 50: Troubleshooting Table

    Tr o u b l e s h o o t i n g Troubleshooting Table Problem Possible Cause Possible Solution Audio Problem There is no sound The software volume Adjust the sound volume control settings in coming from the control is set too low.
  • Page 51 Problem Possible Cause Possible Solution Optical Drive Problems LifeBook notebook Wrong drive designator Verify the drive designator used by the fails to recognize application is the same as the one used by the was used for DVD/CD- operating system. DVD/CD-RW/ CD- RW/CD- ROM in the When the operating system is booted from a ROM’s.
  • Page 52 Tr o u b l e s h o o t i n g Problem Possible Cause Possible Solution Floppy Disk Drive Problems You cannot access You tried to write to a write Eject the floppy disk and set it to write enable. your floppy disk.
  • Page 53 Problem Possible Cause Possible Solution Keyboard or Mouse Problems You have installed Your external device is not Re-install your device. an external properly installed. keyboard or mouse, and it does Your operating system Check your device and operating system not seem to work. software is not setup with documentation and activate the proper driver.
  • Page 54 Tr o u b l e s h o o t i n g Problem Possible Cause Possible Solution Parallel, Serial, and USB Device Problems You have installed Remove and re-install the device. The device is not a parallel port properly installed.
  • Page 55 Problem Possible Cause Possible Solution PC Card Problems A card inserted in The card is not properly Remove and re-install the card. the PC Card slot installed. does not work or is The card may have been Close the application and restart your locking up the system.
  • Page 56 Tr o u b l e s h o o t i n g Problem Possible Cause Possible Solution Power Failures You turn on your The power adapter (AC Move the AC cord to a different outlet, check LifeBook notebook adapter) has no power for a line switch or tripped circuit breaker for from the AC outlet.
  • Page 57 Problem Possible Cause Possible Solution Power Failures Your LifeBook The installed batteries Replace the battery with a charged one or notebook will not are dead. install a Power adapter. work on battery No batteries are installed. Install a charged battery. alone.
  • Page 58 Set the operating source by pressing the powers up, and settings of the setup utility [ESC] key while the Fujitsu logo is on screen are not compatible with or use the [F2] key and enter the setup utility displays power on information, but your configuration.
  • Page 59 Problem Possible Cause Possible Solution Shutdown and Startup Problems Your notebook BIOS setup changes were Make sure you select Save Changes And Exit appears to change not saved when you made when exiting the BIOS setup utility. them and exited the BIOS setup parameters setup utility returning it to when you start it.
  • Page 60 Tr o u b l e s h o o t i n g Problem Possible Cause Possible Solution Video Problems The built-in display The notebook is set for an Pressing [F10] while holding down the [Fn] key is blank when you external monitor only.
  • Page 61 Problem Possible Cause Possible Solution Video Problems The application You are running an Display compression gives a clearer but display uses only a application that does not smaller display for applications that do not support 800 x 600/1024 x support 800 x 600/1024 x 768 pixel resolution. portion of your 768 pixel resolution You can fill the screen but have less resolution...

Table of Contents