Table of Contents
2 、 Design preview window: preview design. In view, "＋" is used to mark the position
of current stitch. The stitch trace of current stitch is highlighted by white color.
3 、 Document and view operation area: For the function of saving design, quitting current
operation, looking up the help and zooming the view
4 、 Panel for checking stitches: For locating the "current stitch" (stitch that need check and
edit).
5 、 Stitch edit function key: Use for switching stitch code, inserting stitch, deleting stitch
and moving the stitch position.
Document and View Operation Area
7.2.2.
Save the current design to a new document.
Reduce the design thus can see the all of the interface. If the design size is smaller
than area of the screen, the system will show the interface at its actual size.
Enlarge the design to 450% to thus look into the detail of the stitch form." Current
stitch" will move the middle position of the screen automatically.
Scale view. The scaling rate is 150% at every time
Actual view: the letter design is displayed in the actual size. At this moment, the
size of the design on the screen is same to the actually embroidered one
Look up for the help menu of the design edition interface
Quit the design edition.
Locating Stitch
7.2.3.
Set "current stitch" to some one stitch. At the same time, use " ＋ " to mark the position of
"current stitch" in the window of design preview. If there is no "current stitch" shown in the
view, so the system will renew the view automatically, and show "current stitch" in the centre
of view.
94
Chapter 7 Memory Design Edition
Move backwards 1/10/100/1000 stitches
Move forwards 1/10/100/1000 stitches
Owner's Manual of BECS- 185 Computerized Control System
Hide quick links:
Table of Contents
