Quick Links
Honeywell HomMed Wireless Scale
Quick Reference Guide
Wireless Scale – Bluetooth Enabled
(Optional Peripheral)
Introduction
This Quick Reference Guide together with the Genesis DM Manual are both training materials provided to instruct the user on the
proper operation and installation of vital sign measuring equipment. Users need to review operating procedures on a regular basis, paying
special attention to Caution statements. Make sure to keep this training guide as well as the Genesis DM Manual available while using the
hardware. This document is designed as a Quick Reference Guide only, and it should be used in combination with the Genesis DM Manual,
and Telehealth Monitor Programming/Troubleshooting Guide, as it does not cover all aspects, features or functions of the Genesis DM
Telehealth Monitor.
This Quick Reference Guide is designed to help you perform the basic steps for adding/installing a wireless Bluetooth scale in the wireless
operational mode.
Honeywell HomMed Customer Service
Toll-free: 888-353-5404
Phone: 262-252-5840
Fax: 262-252-5795
Honeywell HomMed Corporate Offices
Honeywell HomMed
3400 Intertech Drive • Suite 200
Brookfield, WI 53045
Phone: (262) 783-5440 • Fax: (262) 252-6105
1
P4607EN.01
12/2010
Related Manuals for Honeywell HomMed
Summary of Contents for Honeywell HomMed
- Page 1 Honeywell HomMed Wireless Scale Quick Reference Guide Wireless Scale – Bluetooth Enabled (Optional Peripheral) Introduction This Quick Reference Guide together with the Genesis DM Manual are both training materials provided to instruct the user on the proper operation and installation of vital sign measuring equipment. Users need to review operating procedures on a regular basis, paying special attention to Caution statements.
- Page 2 Indications for use The Honeywell HomMed Genesis DM Monitor is intended for personal use where use of the system allows retrospective review of certain physiological functions. The Genesis DM Monitor collects vital signs data (including noninvasive blood pressure, pulse rate, and weight plus data from optional add-on devices) then can transmit the data to a central viewing station via a communication network.
-
Page 3: Product Description
Scale The Honeywell HomMed scale is available in regular (Wired) and Bluetooth (Wireless) versions. The scale has a capacity of 500 lb (227 kg) and collects weight using four load cells, one in each corner of the scale. The accuracy of the weight is +/- 0.5 lb (0.2kg). The Genesis DM supplies power and communication to the scale through the scale cord, or the scale can operate in a battery powered mode. - Page 4 Connecting a HomMed Bluetooth (wireless) Scale These instructions cover preparing the DM Monitor to use a Bluetooth adapter and wireless Honeywell HomMed Bluetooth Scale. Three basic actions are involved: 1. Installing the Honeywell HomMed Bluetooth adapter. 2. Connecting one wireless scale.
- Page 5 What is the slide switch? The slide switch is part of the adapter. The slide switch allows different positions to be selected for different adapter functionality. The slide switch is not an ON / OFF switch; therefore, the slide switch is not a “power” switch, but must be in the proper position in order to enable proper transmission and data flow between the wireless scale and the DM Monitor.
- Page 6 After connecting the Bluetooth Adapter and Adapter Cable to the DM Monitor and making sure that the slide switch is toward the connector end, power ON the DM Monitor. When prompted, enter the Setup Wizard by pressing YES. Enter Setup Wizard? (Yes/No) Connecting One Wireless Scale: The monitor will direct the user to place the Scale in its final position and the display will indicate this, along with the request to press (Yes)
- Page 7 the scale and monitor are too far apart, or if items or personnel are blocking the signal, then the scale and monitor will not be able to connect and communicate with one another as needed for proper functionality. The monitor will display the “Please Wait Scanning Devices” message as it scans for suitable Bluetooth devices in the nearby vicinity. The DM Monitor locates, senses, and pairs with a single scale automatically.
- Page 8 When a single scale is detected and paired with the monitor, the monitor will display the Pairing Successful message. If there is only one scale in the vicinity, that scale will be the one that the monitor will pair with. Pairing Successful If the monitor is unable to detect the scale, it will display the “Pairing Failed”...
- Page 9 Scan for Available BT Devices? [YES] or [No] When the scale is detected, the monitor will display the Pairing Successful message. Pairing Successful Complete the Setup Wizard in the normal manner. P4607EN.01 12/2010...
- Page 10 Connecting when multiple wireless scales are in the area To configure the DM Monitor for use when there are multiple wireless scales in the area, before beginning the pairing process, verify the serial number of the scale that you wish to pair with the monitor. The serial number is located on the bottom of the scale. You may write the Serial Number here for reference purposes: ___________________________ After verifying the serial number, power ON the DM Monitor.
- Page 11 Please Wait Scanning Devices . . . Establishing communications may take several minutes. NOTE: The monitor will prompt the user to place the Scale in its final position. Place Scale in Final Position Assure that there is power to the scale, supplied either by the scale batteries or the scale AC power adapter. Place the scale in a position convenient for the patient.
- Page 12 Please Wait Scanning Devices . . . : Establishing communications may take several minutes. NOTE During the Paring process the Bluetooth adapter blue LED (light emitting diode) will flash on and off, indicating activity. The red LED should be ON, indicating that the adapter is powered by the monitor. Check the DM Monitor-to-Bluetooth adapter connection if the red LED is not ON.
- Page 13 Press the NO key to continue to the next number. Select Scale To Pair. . . 2. 5094950020 Again, press the NO key to continue to the next number. Select Scale To Pair. . . 3. 5094950021 When the selected scale is detected and paired with the monitor, the monitor will display the Pairing Successful message. Pairing Successful After the Pairing Successful message appears, complete the Setup Wizard in the normal manner.
- Page 14 Using the Scale during a Scheduled Reading: During a scheduled reading, the monitor will display the following message when attempting to communicate with the wireless scale: Preparing Scale Please Wait When communication is established, the user will be prompted to step on the scale as in normal (wired) operation. If the monitor is configured for voice prompting, the audible message will be “Please step on the scale”...
- Page 15 SCALE o o o o o This completes the installation and use of the Wireless Scale. If you have any questions regarding the Wireless Scale please contact Honeywell HomMed Customer Service at 1-888-353-5404. P4607EN.01 12/2010...
-
Page 16: Troubleshooting
Troubleshooting: If communication cannot be established, the monitor will display one of the following error messages; Error Code E203, E204 or E205, Scale Disconnected: E203 error code: The Bluetooth Adapter is not plugged in properly to the back of the monitor. Solution: Check the connection on the rear panel and retry. - Page 17 E205 error code: No Bluetooth connection because the scale is not powered, the scale batteries are absent, improperly installed, or need replacement, or the scale is too far away from the monitor. Solution: To correct the error, check that there is power to the scale, or that it is located within range of the monitor (approximately 10 meters, or 30 feet).