Table of Contents
Quick Links
Table of Contents
Related Manuals for GE ZGU36L4DYSS
Summary of Contents for GE ZGU36L4DYSS
- Page 1 ® GE Monogram Installation Instructions Professional Gas Cooktops 48" Natural Gas Models ZGU48N4GWSS ZGU48N6RWSS ZGU48N6DWSS 48" LP Gas Models ZGU48L4GWSS ZGU48L6RWSS ZGU48L6DWSS 36" Natural Gas Models ZGU36N6YSS ZGU36N4RYSS ZGU36N4DYSS 36" LP Gas Models ZGU36L6YSS ZGU36L4RYSS ZGU36L4DYSS...
-
Page 2: Table Of Contents
WARNING If you have questions concerning the installa- Proper installation is the responsibility of the tion of this product, call the GE Answer installer. Product failure due to improper Center® Consumer Information Service at installation is not covered under the GE 800.626.2000, 24 hours a day, 7 days a week. -
Page 3: Design Information
ZGU36N6YSS 6 gas burners and griddle 6 gas burners 48" Liquid Propane Gas Models: 36" Liquid Propane Gas Models: ZGU48L4GWSS ZGU36L4DYSS 4 gas burners, grill and griddle 4 gas burners and griddle ZGU48L6RWSS ZGU36L4RYSS 6 gas burners and grill 4 gas burners and grill... -
Page 4: Product Dimensions And Clearances
Design Information Professional Gas Cooktops Product 47-7/8" 26-5/8" Dimensions 48" Wide Hood 8-7/16" & Clearances 13" Max. 36" Min. to 30" Min. Combustible 36" Max. 12" Min. to Material From 18" Min. Combustible Cooking Material Surface Each Side 2" 17" 48"... -
Page 5: Installation Options
Installation Preparation Professional Gas Cooktops These cooktops can be installed in standard • The stainless surface of the cooktop will be Installation 24" or deeper 25" cabinets. 1/2" higher than adjacent countertop. Options • In 24" deep cabinets, the front of the cooktop will project approximately 1-7/8"... -
Page 6: Tools & Materials Required
Installation Preparation Professional Gas Cooktops • Gas-resistant pipe joint sealant • Saw Tools & • 5 foot, 5/8" AGA-certified flexible metal gas • Measuring tape Materials • Carpenter’s square supply line. –If required by local codes, use solid pipe • Pipe and fittings as required. Required: fittings. -
Page 7: Installation
Installation Professional Gas Cooktops • Flatten the carton and use a piece as a pad Use a hand-truck to move this cooktop. on the bottom and back of the hand-truck. Lift the cooktop onto the hand-truck S tep Before moving the cooktop indoors: standing on its end, with the bottom of the •... -
Page 8: Step 3: Install The Cooktop
Installation Professional Gas Cooktops • Lower the cooktop into the opening. Make sure the cooktop is evenly seated and sup- S tep ported. A side frame gasket will seal the cooktop to the countertop. • “L” brackets with screws are provided to Install secure the cooktop to the countertop or to adjacent cabinetry. -
Page 9: Step 6: Connect Electrical
Installation Professional Gas Cooktops Step Plug power cord into properly grounded receptacle. Connect Electrical • Replace the burner bowls and burner caps. • Adjustments should not be required, unless Igniter Step vibration during transit or variations in local Burner gas supply make minor adjustments neces- Main Burner sary. -
Page 10: Adjustable Low Burner Settings
Installation Professional Gas Cooktops Adjustable low setting • Grip the shaft with pliers and turn counter- The open top burners and grill valves have an clockwise to lower the flame, or clockwise to Step adjustable low setting. Each valve is individu- increase the flame. - Page 11 Notes Professional Gas Cooktops...
- Page 12 NOTE: While performing installations described in this book, safety glasses or goggles should be worn. To obtain specific information concerning any ® Monogram product or service, call GE Answer Center consumer information service at 800.626.2000—any time, day or night. For Monogram local service in your area, call 1-800-444-1845.