Table of Contents
Degree of drying has not been reached
or the drying time is too long.
Display may indicate E:03.
Display may indicate E:03.
SERVICE and REPAIR
The Bosch dryers require no special
care other than the care and cleaning
noted above.
i
Before calling the customer
service, check whether you can
rectify the fault yourself by means
of the following table.
See Page 27.
If service becomes necessary, contact
your dealer or installer or an authorized
service center. Do not attempt to repair
the appliance yourself.
Any work performed by unauthorized
personnel may void the warranty.
28
Moisture sensor dirty.
Exhaust air duct is blocked or too long.
Filter dirty.
Laundry was too wet.
Unsuitable program selected.
Maximum drying time was exceeded.
Motor limit temperature was exceeded.
Degree of dryness not correct set.
If you are having a problem with your
Bosch dryer and are not pleased with
the service you have received:
-
First, please contact your installer
or the Bosch Authorized Service
Contractor in your area and
explain to them why you are not
satisfied. This will usually correct
the problem.
-
If after working with your installer
or service person the problem still
has not been resolved to your
satisfaction, please let us know
by writing to us at:
Robert Bosch Hausgeräte GmbH
Carl Wery Strasse 34
81739 München/Deutschland
Clean moisture sensor as described on Page 26.
Switch off/switch on again.
Clean exhaust air extraction. Reduce exhaust air duct
to maximum length as described on Page 7.
Switch off/switch on again.
Clean filter as described on Page 25.
Switch off/switch on again.
Spin laundry at higher speed in the washing
machine. Switch off/switch on again.
Select program with aid of the Program selection
table (see Page 19). Switch off/switch on again.
Clean filter (see Page 25).
Check exhaust air extraction.
Spin laundry at a higher speed in your washer.
Switch off dryer, leave to cool down for 30 min.
Switch on again. Start program.
Change settings for degree of dryness, see Page 17.
Please be sure to include, if writing,
or have available, if calling, the following
information:
-
Model Number
-
Serial Number
-
Date of Original Purchase
-
Date Problem Originated
-
Explanation of Problem
Also, if writing, please be sure to
include a daytime telephone number
and a copy of the sales invoice.
You will find the model number and
serial number information on the rating
plate located on the inside of the front
panel.
Hide quick links:
Table of Contents
