Basic Operations - Panasonic CZ-RTC3 Operating Instructions Manual

1

Start operation.

Press

(The operation indicator illuminates.)

 To change the setting

(P.10)

 To turn the energy saving

operation ON/OFF

Press during operation.

(Only for models equipped with the

energy saving function.)

 To stop

(The operation indicator turns off.)

2

Select the item to set.

Press ◄

3

Change the setting.

Press ▲▼ →

Note

 Operation modes that cannot be set are not displayed.

 The fl ap display differs from the actual fl ap angle.

 Pressing

the contents before mains power failure has occurred.

 If no operation is performed for a certain period of time, the backlight turns off to

save electricity. (Press any button for illumination.)

 The energy saving operation restricts the maximum current value, resulting in

decreased cooling/heating performance.

(If the current of outdoor units does not reach the peak due to low load operation,

the current value is not restricted.)

 The temperature range that can be set varies depending on the model.

 The set temperature range can be changed using the remote controller. (P.24)

 Some models do not display the fl ap.

8

(EN)

.

►.

.

(The cursor disappears.)

after recovery from mains power failure will resume operation with

Operation indicator

Energy saving operation

is in process.