Ip Address - Sony CCP-8000 System Setup Manual
Hide thumbs
Also See for CCP-8000:
- User manual (563 pages) ,
- Installation manual (58 pages) ,
- Operation manual (36 pages)
Table of Contents
3-3. IP Address
3-3. IP Address
The MVS-8000 system uses IP address 10.x.x.x.
Each device of MVS-8000 system has independent NETWORK terminal for each LAN.
The IP address for all NETWORK terminals has same rules as below.
The IP address is identified by four byte of the form below.
10.AA.BB.CC
ex. 10.1.2.1
10.
AA.
Fixed
GROUP ID + LAN ID
GROUP ID is defined as DIP
SW of GROUP ID 1 to 63.
LAN IDs are as follows ;
Control LAN :
Peripheral LAN : 64
Data LAN :
Used bit for LAN Group ;
Control LAN :
Peripheral LAN : 65 to 127
Data LAN :
*1 : the default setting is "1".
Host name
When IP address is defined, it is also named host name automatically.
The host name is identified by ten digits (characters and numbers) of the format below.
Format :
Unit name (3 characters) + Group ID (3 digits) + LAN code (1 character) + Unit ID (3 digits)
Example :
IP address : 10.1.1.1
Host name : PNL001C001
Unit category
PANEL
SWITCHER
DME
DCU
Group ID + LAN Code
Control LAN
Peripheral LAN
Data LAN
3-2
BB.
Unit cord (Fixed)
It uses to identify unit category.
0
128
Unit category are as follows ;
1 to 63
PANEL :
SWITCHER : 2
129 to 191
DME :
PFV-SP :
DCU :
ROUTER :
Unit name
PNL
SWR
DME
DCU
001C to 063C
001P to 063P
001D to 063D
CC.
Unit ID
Unit ID is defined as DIP SW of
UNIT ID 1 to 254.
Used bit ;
1
1 to 254
*1
3
4
5
6
MVS-8000 System
SYSTEM SETUP
- Quick Links:
- Mvs-8000
- Ccp-8000
- Tally Setup
- Specifications
Hide quick links:
Table of Contents
