Samsung RB195ACRS Service Manual page 35

NW-미주향-AC 2010.6.8 3:47 PM 페이지35 in

TROUBLESHOOTING

4-1-3. Display function of Load condition

❶

① If

② If taking the finger off from the keys when above blinking condition and press

1) If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds, ALL ON/OFF will

blink at 0.5 second intervals for 2 seconds.

2) At this moment, if taking the finger off from Power Freeze Key + Power Cool Key and pressing Fridge

Key, load condition display mode will be returned with alarm ("Ding-dong").

3) Load condition display mode shows the load that MICOM signal is outputting. But, it means that MICOM

signal is outputting and does not means whether load is operating or not actually. That is, though load

operation is displayed, load could not be operated by actual load error, PCB relay error, or etc. And this

function would be applied at Service (A/S).

4) Load condition display function will maintain for 30 seconds and then normal condition will be returned

automatically.

5) Load condition display is as below.

Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds,

All ON/OFF will blink at 0.5 second intervals for 2 seconds.

load condition mode will be started.

F-10 F-1

ⓔ

R-10 R-1

ⓐ

ⓕ

ⓑ

ⓖ

ⓒ

ⓓ

35

❶

❷

Fridge Key,