Fujitsu fi-5950 Operator's Manual page 200
Hide thumbs
Also See for fi-5950:
- Operator's manual (257 pages) ,
- Getting started (27 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Item
Timeout for man-
Specify the standby time period. After the
ual feeding
predetermined time period has elapsed,
"Section 8.24"
manual feeding mode is canceled.
Scan Setting for
When the document has tab on the bottom
Document with
edge of the image, the tab image remains
Tab(Automatic
even if the document is scanned with
Page Size Detec-
Automatic Page Size Detection. When
tion)
"Tab-attached document" is specified, the
"Section 8.25"
tab image remains in the scanned data but
the scanning speed may be rather slow.
Paper stop posi-
When a multifeed error is detected by over-
tion at multifeed
lapping of documents, the position to stop
error
the documents on which the multifeed
"Section 8.26"
occurred can be selected.
Overscan Control
Specify the optimal amount of black mar-
gins for overscan.
"Section 8.27"
[Default] button
Resets the current settings to the factory setting.
[Save]button
Saves contents of various settings onto the computer.
(Use this button to apply the same settings to other fi-5950 scanners.)
Saving outputs the EEPROM value currently written in the scanner. Click the
ATTENTION
[Apply] button first if you have changed the value immediately before saving.
[Restore] button
Restores contents of the settings saved onto the computer back to the scanner.
Explanation
Selectable parameter
5, 10, 20, 30, 40, 50, 60, 70, 80,
90, 100, 110 ,120, 180, 240,
300, 360, 420, 480, 540, 600,
900, 1200, 1800, 1999
(seconds)
Document with tab/Document
without tab
Normal / Paper output slot
Normal / Optimize
8.1 Scanner Settings
Default
10 seconds
Document
without tab
8
Normal
Normal
189
Table of Contents
