Fujitsu fi-5900C Getting Started

Image scanner

Quick Links

P3PC-1422-03EN
Table of Contents
loading

Summary of Contents for Fujitsu fi-5900C

  • Page 1 P3PC-1422-03EN...
  • Page 3: Table Of Contents

    2.1 Installing the Scanner ... 4 2.2 Connecting the Scanner to Your PC... 4 2.3 Installing the Scanner Application ... 6 Appendix 1 TROUBLESHOOTING... AP-1 Appendix 2 DAILY CARE ... AP-4 Appendix 3 REPLACING CONSUMABLES... AP-5 fi-5900C Image Scanner Getting Started...
  • Page 4: Canadian Doc Regulations

    Thank you for purchasing the fi-5900C Duplex Color Scanner. This document describes how to use fi-5900C and basic operation methods. Before you start using fi-5900C be sure to thoroughly read this manual to ensure correct use. The "Operator’s Guide" stored on the Setup CD-ROM...
  • Page 5: Note, Liability

    Windows 95 Windows 98/98SE Windows Windows NT 4.0 Windows 2000 Windows XP fi-5900C Image Scanner Getting Started Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state, or federal laws. ® ® Microsoft Windows operating system ®...
  • Page 6: Symbols Used In This Manual

    All Rights Reserved, Copyright© PFU LIMITED 2006 About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product. Warning Indications Used In This Manual...
  • Page 7: Safety Precautions

    Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. fi-5900C Image Scanner Getting Started...
  • Page 8 When the scanner is not going to be used for a long period of time, be sure to disconnect the power plug from the power outlet for safety.
  • Page 9: Chapter1 Preparing The Scanner

    If any parts are missing or defective, contact your scan- ner dealer or an authorized FUJITSU scanner service provider. Handle the scanner and accessories with care. 1.2 Names of Parts This section describes the names of parts.
  • Page 10: Operator Panel

    (Normally no need to change from the default setting) Use this button to start linked applica- Send to tions (*About the settings, refer to the "fi-5900C Operator’s Guide" on the Setup CD-ROM). Scan Use this button to turn the power ON/ OFF.
  • Page 11 To return the scanner to the ready status ("1"), press "Scan" or "Send to" button. If this alarm occurs, turn the power off and then on again. If the alarm is indicated after turning on the power again, contact your service engineer. fi-5900C Image Scanner Getting Started Descriptions...
  • Page 12: Chapter2 Installation Of The Scanner

    Chapter2 2.1 Installing the Scanner 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation space, refer to the fi-5900C Operator’s Guide, chapter "10. Scanner Specifi- cations". • The scanner weight is 50 kg (110 lb).
  • Page 13 SCSI card to use. It is recommended to use a cable of length 1.5m or shorter. • SCSI card Find the recommended SCSI card information on the Fujitsu web site (FAQ). http://www.fujitsu.com/global/support/ computing/peripheral/scanners/scsi/ • When connecting the SCSI cable, turn ATTENTION the scanner off.
  • Page 14: Installing The Scanner Application

    (TWAIN or ISIS). The Software Operation Panel is neces- sary for changing the scanner settings. The following applications also come with fi-5900C. They will provide you more convenient and advanced usage. The following sections describe installation of each driver and application.
  • Page 15: Scanner Driver

    Power button 6. Click [INSTALL PRODUCTS] Hopper 7. The Error Recovery Guide Installation window ATTENTION fi-5900C Image Scanner Getting Started ⇒ appears. This screen may not appear when the "Autoplay" setting of your CD drive is off.
  • Page 16 11. When the [InstallShield Wizard Complete] win- dow appears, click [Finish]. Your computer will be restarted and the scanner will be detected. Do not remove the Setup CD-ROM from the CD drive until your PC has completely restarted.
  • Page 17: Confirming Installation

    [ScandAll 21] win- dow. If scanning is completed without trouble, the installation was performed successfully. For details on various types of scanning, refer to the "fi-5900C Operator’s Guide" on the Setup CD-ROM. fi-5900C Image Scanner Getting Started [FUJITSU Fi-5900Cd] [FUJITSU TWAIN 32]...
  • Page 18 For FUJITSU ISIS Scanner Driver ■ Preparation Confirm the following items before installing the appli- cation. • Take out the Setup CD-ROM from its pack- age, but do not insert the Setup CD-ROM into the CD driver yet. • Connect the scanner correctly to your PC.
  • Page 19 1. Insert the Setup CD-ROM into a CD drive. ⇒ appears. 2. Click [INSTALL PRODUCTS] PRO (Trial)]. 3. Continue to install the application following the instructions in the window. fi-5900C Image Scanner Getting Started " is an image capturing software that [QuickScan...
  • Page 20 Scan]-[QuickScan]. 3. Select [Select Scanner...] from [Scan] menu in QuickScan Pro 4. And select fi-5900C from the list of [Scanner:], and then click [OK] button. 5. Select [Preview Settings...] from the [Scan] menu. Set the scan resolution, paper size and other scanning parameter, and then click [OK].
  • Page 21 3. Select "Install Adobe Acrobat". ® 4. Click the [Next] button. The set up window appears. fi-5900C Image Scanner Getting Started Adobe Acrobat is required for displaying the manuals stored in the CD-ROM. * Installation of Adobe Acrobat is not neces-...
  • Page 22: Uninstalling Supplied Programs

    This displays the "Add or remove Programs" screen which displays a list of the currently installed applications. 4. Select the application to uninstall. • When uninstalling FUJITSU TWAIN 32 scanner driver, select "Scanner Utility for Microsoft Win- dows". • When uninstalling Scandall 21, select "ScandAll 21".
  • Page 23 (OS) you are using. Follow the on screen instructions of the OS. Example: When the OS Windows 2000 • "Add or Remove Programs" - "Add/ Remove Applications" • [Changel/Remove] button - [Add/ Remove] button. fi-5900C Image Scanner Getting Started...
  • Page 24: Appendix 1 Troubleshooting

    Clean the dirty locations. Scan the documents that satisfy the "Document Quality" and the "Multifeed Detection Condi- tions" in the chapter 7 of the fi-5900C Operator’s Guide. Fan the documents before scanning. Correctly align the document stack and load them on the hopper.
  • Page 25 Check this item Use the documents that satisfy the "Document Quality" and the "Multifeed Detection Condi- tions" in chapter 5 of the fi-5900C Operator’s Guide. Clean the Separator roller or the Pick rollers. Refer to the Operator's Guide "4. Daily Care".
  • Page 26: Temporary Error

    The following shows the procedure for releasing of each of the temporary errors. • "U1" error 1. Remove the jammed documents. (Refer to the fi-5900C Operator’s Guide "6.1 Clearing Document Jams" on the Setup CD- ROM.) 2. Confirm that the documents meet the paper specifications for scanning.
  • Page 27: Appendix 2 Daily Care

    Skew-detection sensor Remarks Document sensor ATTENTION For details on the cleaning the ADF, refer to "4.Daily Care" in the fi-5900C Operator’s Guide on the Setup CD-ROM". fi-5900C Image Scanner Getting Started Standard Cleaning Cycle Clean these parts after every 10,000 scans.
  • Page 28: Appendix 3 Replacing Consumables

    PA03450- rollers K012 To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. The replacement cycles above are rough guidelines when scanning A4/Letter sized, 20lb paper. This clean- ing cycle varies according to the type of papers scanned and how frequently the scanner is used and cleaned.
  • Page 29: Pick Roller

    ■ Pick roller ■ Separator roller ■ Brake roller Cover Pick roller Separator roller Cover Brake roller fi-5900C Image Scanner Getting Started...
  • Page 30 Image Scanner Getting Started P3PC-1422-03EN Date of issuance: June, 2006 Issuance responsibility: PFU LIMITED Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. The contents of this manual are subject to change without notice.

This manual is also suitable for:

5900c - fi - document scanner

Table of Contents