INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUAL INSTRCUTIUNI РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ UPUTE ZA UPORABU UPUTSTVO ZA UPOTREBU PRIRUČNIK FLAT DIGITAL TV DIGITALER FLACHBILDFERNSEHER TELEVIZOR DIGITAL CU ECRAN PLAT LCD / LED ТЕЛЕВИЗОР FLAT DIGITALNI TV PRIJAMNIK FLAT DIGITALNI TV ZARAVAN DIGITALNI TELEVISOR...
Contents Preparation & Safety Precautions ......2 Preparation ............. 4 DVD Mode Important Information ......4 Specifications ............5 PC Typical Display Modes ........5 Remote Control RC 4862 ........6 General DVD Operation ......... 7 Viewing the Connections ........8 Viewing the Connections - continued .....
Preparation & Safety Precautions Before lightning or storms, or if the TV is not going to be used for a while (e.g. if going away CAUTION on holiday), disconnect the TV set from the mains. The mains plug is used to disconnect RISK OF ELECTRIC SHOCK TV set from the mains and therefore it must DO NOT OPEN...
Page 6
Waste Disposal: Connection to a Television Distribution System (Cable TV etc.) from Tuner: Device connected to the Packaging and packaging aids are recyclable and protective earthing of the building installation through should principally be recycled. Packaging materials, the mains connection or through other apparatus with such as foil bag, must be kept away from children.
On cleaning Preparation • Before playing, clean the disc with a cleaning cloth. For ventilation, leave a free space of at least 10 cm Wipe the disc from the center out. all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
For advice on where to purchase accessories, Specifications please contact the store where you purchased your TV BROADCASTING equipment. PAL/SECAM B/G D/K PC Typical Display Modes RECEIVING CHANNELS The following table is an illustration of some of the VHF (BAND I/III),UHF (BAND U), HYPERBAND typical video display modes.
Remote Control RC 4862 1. Standby: On / Off switch of the TV 2. Numeric buttons: Used to navigate channels and enter passwords, text etc. 3. TV: Displays channel list / Switches among broadcast types 4. Volume +/- 5. Mute: Completely turns off the volume of the TV 6.
General DVD Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons DVD Playback Movie Playback Picture Playback Music Playback Play Play...
Viewing the Connections Note:Connections may vary depending on your model. Connection Description Other Details Scart socket inputs or outputs for external devices. Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Green, Blue, Component Video Inputs (YPbPr) are used for connecting Red;...
Viewing the Connections - continued Connection Description Other Details Headphone jack is used for connecting an external headphone to the system. Side Video input is used for connecting video signals of a Side, Yellow camcorder or any other video device. Use Side Audio inputs to RCA jack, enable sound connection.
Environmental Information TV and Operating Buttons This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode.
Antenna Connection: Step 1 - Checking the TV and Accessories Connect the aerial/cable or satellite TV plug to the Note: You should check the accessories after Aerial, Cable or Satellite INPUT socket located at purchasing. Make sure that each accessory is the rear of the TV.
Direct, another menu screen will be displayed. Select Step 5 - First Time Installation an available satellite and press OK to scan for services. When turned on for the first time, the language Unicable: If you have multiple receivers and a selection screen is displayed.
• Some stream packets may not be recorded because Timeshift Recording of signal problems, so sometimes video may freeze Press Pause button while watching a broadcast to during playback. activate timeshifting mode.In timeshifting mode, the • You can use USB hubs with your TV’s USB programme is paused and simultaneously recorded inputs.
TV Menu Features and Functions Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode Mode can be set to one of these options: Cinema, Game, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen.
Sound Menu Contents Volume Adjusts the volume level. Selects the equalizer mode. Custom settings can be made only when Equalizer in user mode. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Sound Mode You can select a sound mode.
Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only Audio Description if the broadcaster supports that additional narration track. Note: Audio description sound feature cannot be available in recording or time shifting mode.
IMPORTANT: Connect a USB disk to your TV while General TV Operation the TV is switched off. You should then switch on the TV to enable the recording feature. Using the Channel List Note: Switching to a different broadcast or source is The TV sorts all stored stations in the Channel List.
Notes: Troubleshooting & Tips • Recorded programmes are saved into the connected Tv will not turn on USB disk. If desired, you can store/copy recordings Make sure the power cord is plugged in securely to onto a computer; however, these files will not be wall outlet.
Multichannel audio AV and HDMI Signal Compatibility Means that the TV program is aired in several audio versions, for example, in two different languages. Source Supported Signals Available This is possible if on an analogue TV each of the PAL 50/60 two channels of the stereo tracks for left and right channels are occupied with one audio track in mono NTSC 60...