Table of Contents
Quick Links
OWNER'S MANUAL
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5169M
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4164
Standards Australia
APP No: N15959
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Table of Contents
Related Manuals for Palsonic 5169M
Summary of Contents for Palsonic 5169M
- Page 1 51CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 5169M Type Tested Electrical Safety AS/NZS 3250 Lic 4164 Standards Australia APP No: N15959 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE...
-
Page 2: Table Of Contents
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. -
Page 3: Notes For Operation
Main features Hyperband. Auto/manual search. Voltage synthesised system 100 preset channels. TV system: PAL-B/G, NTSC-4.43/3.58 (AV). Full function remote control & English on screen menu display No-signal blue background display and AUTO-POWER-OFF function. Four picture mode settings. Sound mute function. Sleep timer. -
Page 4: Installation And Appearance
Installation and appearance Antenna connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connecting the antenna lead. -
Page 5: Appearance
Appearance Front view Menu TV/AV Volume down/up Standby Channel down/up (Channel select) Remote sensor Power switch Power indicator Note: Functions of MENU, , VOL , CH and TV/AV are also provided to the remote controller. Back view AUDIO OUT/IN Antenna input VIDEO OUT/IN... -
Page 6: The Remote Controller
The remote controller Standby Channel direct select Sleep timer Picture mode selection *Sound system select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remote controller is ineffective in sound system selection. Similarly in the Preset and Function menus the SYS item (sound system selection item) is ineffective. -
Page 7: Operation
Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the screen will display channel number, colour and sound system. -
Page 8: Picture Menu
Press the VOL button to enter into the sub-menu. To exit the menu press the MENU button. Note: the menu displayed on the screen will disappear automatically in 10 seconds if not in operation. 1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. - Page 9 Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off. Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu.
-
Page 10: Function Menu
higher band in the sequence of VL station is located, the set will store the signals with a channel number from 0. When all the signals are searched and stored, the TV returns to 0 channel automatically, auto-search is finished. * After auto-search, all programs colour system is set to AUTO and in AFT-ON mode. -
Page 11: Channel Selection
2) SYS (sound system) selection. In item is ineffective. (Refer to the NOTE on page 6) 3) BLUE ON/OFF selection. Select and highlight BLUE ON/OFF. Press VOL "BLUE ON" is selected, blue background will appear on the screen automatically when no input signals, and the sound is mute. -
Page 12: Picture And Volume Adjustment
Picture and volume adjustment 1. Picture adjustment Press PIC button repeatedly, on-screen display will change in the sequence below BRIGHTNESS BRIGHTNESS NTSC Press VOL button to adjust the level. For example, to adjust brightness: Press " Press "PIC" BRIGHTNESS llll... Press "... -
Page 13: Picture Mode Selection
Picture mode selection You can select the picture quality instantly among three presets modes and one user-set mode. Press the button to select the desired picture quality. DYNAMIC, STANDARD, MILD and MEMORY (user-set) can be selected cyclically. MEMORY Item Output Brightness Mode DYNAMIC... - Page 14 COLOUR SYSTEM PAL (RF/VIDEO) AUTO NTSC 3.58 (VIDEO) PAL (RF/VIDEO) PAL 60 (VIDEO) N358 NTSC 3.58 (VIDEO) N443 NTSC 4.43 (VIDEO) 3. SLEEP timer Using the SLEEP button allows you to have the appliance automatically turned off after a preset time (the time range will be as long as 120 minutes) , and set the appliance to standby mode.
- Page 15 Press AV Press AV Note: 1) When receiving broadcasting TV program (the TV signals are input through aerial terminal), press the AV button to switch the set to TV mode. 2) When receiving programs played back by Video DISC., VCR, Satellite receiver, VCD (the signals are input through AV terminals), please set the receiver to AV mode.
-
Page 16: External Equipment Connections
External equipment connection This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipment (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playback and recording the programs. 1. Video playback The figure below shows how to connect the TV set to the video equipment. - Page 17 3. DUBBING The picture below shows how to connect TWO VCRs to the TV for dubbing one from the other. Press AV button on the remote control unit to select AV mode before dubbing, "AV" will be displayed on the screen. The TV set will act as a monitor to help you edit while dubbing. NOTE: The set MUST remain in Video mode and MUST NOT be switched off during the session.
-
Page 18: Trouble Shooting
TROUBLE SHOOTING If any problem arises in the operation of your set, first check through this list of symptoms and correction. Should the problem be unsettled, unplug the set and contact your dealer. Symptoms No picture, no sound. Poor sound, picture OK. -
Page 19: Specifications
Specifications : AC 240V, 50Hz Power Supply : VHFL 0~5, 5A; VHFH 6~11; UHF E21-E69 Receiver Channel : S1-S41 (Hyperband) Cable Channel : 590 (W) x 448 (H) x 486 (D) Dimension (mm) : 23 kg Weight : 51cm : 70W Power Consumption : 75 ohm Antenna Impedance... - Page 20 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-56903-05...