Resetting The Air Filter Counter; Updating The Firmware - Canon WUX6000 User Manual
Hide thumbs
Also See for WUX6000:
- User manual (236 pages) ,
- User manual (236 pages) ,
- User commands (96 pages)
Table of Contents
Customizing System Operation (System Settings)
Resetting the Air Filter
Counter
> [System settings] > [Other settings] >
[Air filter counter]
HDMI
Digital PC
This resets the counter which
reminds you of the time for cleaning
and replacing the air filter.
For details about how to replace or
clean the filter, refer to
To view the air filter counter, press the
OK button when [Air filter counter] is
selected.
Select [Reset] and press the OK button.
To reset the air filter counter, select
[Yes] on the confirmation screen and
press the OK button.
Press the MENU button.
Downloaded from ProjectorsManual.com Manuals
Component
LAN
Analog PC
USB
page
196.
Updating the Firmware
> [System settings] > [Other settings] >
[Firmware]
HDMI
Digital PC
Update the projector firmware as
follows. Save firmware updates from
the Canon website to the root
directory on a USB flash drive.
In some cases, it may not be possible to
download updates. For details, contact
the Canon Customer Support Center.
Select [Firmware], press the OK button,
and check the firmware version
displayed. Selecting [OK] will display an
update confirmation screen. To update
the firmware, select [Yes].
Firmware versions shown here are for
illustration only and differ from actual
versions.
Firmware updating takes a few minutes.
During the update, the LED indicator
will flash in red. Do not turn off the
projector while the LED is flashing.
After the update, the projector will
automatically turn itself off and enter
standby mode.
110
Component
LAN
Analog PC
USB
Table of Contents
