EML20011
CHANGING GEAR OIL
w
8 Be sure the outboard is securely fas-
8 Never get under the lower unit while it
1) Put the outboard in a vertical position
2) Place a suitable container under the
3) Remove the oil drain plug 1.
NOTE:
102015
The oil drain plug is magnetic. Remove all
metal particles from the plug before rein-
stalling it.
w
4) Remove the oil level plug 2 to allow
cC
q
Inspect the used oil after it has been
drained. If the oil is milky, water is get-
601021
ting into the gear-case which can cause
gear damage. Consult a Yamaha dealer
for repair of the lower unit seals.
NOTE:
For disposal of used oil consult your
Yamaha dealer.
4-22
tened to the transom or a stable stand.
You could be severely injured if the out-
board falls on you.
is tilted, even when the tilt-support
lever is locked. Severe injury could
occur if the outboard accidentally falls.
(not tilted).
gear-case.
the oil to drain completely.
GB
< To be continued >
Hide quick links:
Chapters
