Switching On The Appliance; Switching Off The Appliance; Rearranging The Interior - Bosch KGV series Instructions For Use Manual

Hide thumbs Also See for KGV series:
Table of Contents
-
m r
HHHB*
Switching on the
appliance
w
Press button Fig. fJ/1. Temperature lamp
blinks +4 °C. The appliance starts to cool,
the interior light is switched on when the
door is opened.
Selecting the temperature
The refrigerator compartment
temperature is set in the factory to +4 °C.
The set values can be changed,
see description of the control panel:
2 Temperature adjustment button.
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 OC.
Operating tips
• The sides of the housing are sometimes
heated slightly. This prevents
condensation in the area of the door
seal.
• While the refrigerating unit is running,
beads of water or frost form on the rear
of the refrigerator compartment. It is not
necessary to scrape off the frost or wipe
off the beads of water. The rear panel
defrosts automatically.
The condensation is conveyed down
the drainage channel, Fig.
Dl!
A, to the
refrigerating unit where it evaporates.
• If the air humidity is high, condensation
may form in the refrigerator
compartment, especially on the gla.ss
shelves. If this is the case, pack or wrap
the food and select a lower temperature
in the refrigerator compartment.
20
• If you cannot open the freezer
compartment door immediately after
closing it, wait 2-3 minutes until the
partial vacuum has equalised.
• The refrigeration system may cause
several areas of the freezer shelves to
frost quickly. This does not affect
function or power consumption.
The appliance does not require
defrosting until the entire surface
of the freezer shelf is covered with
more than 5 mm of frost or ice.
Switching off the
appliance
Press button Fig. fJ/1. Temperature
display lamp Fig. fJ/3a goes out. The
cooling process and the lighting are
thereby switched off.
Disconnecting the
appliance
If the appliance is not to be used for
a prolonged period:
I . Pull out the mains plug
2. Cleaning the appliance
3. Leave the appliance door open.
Rearranging
the interior
If required, the interior shelves and the
door containers can be r.epositioned: pull
the shelf forwards, lower and swivel out
sideways Fig.
D.
Lift the container and
remove Fig.
D.
Table of Contents
loading

Table of Contents