To Remove Pressure Relief Valve, Flow Switch And Air Purge Valve; To Remove Water Pump - Panasonic WH-ADC0916G9E8 WH-UX09FE8 Service Manual
Hide thumbs
Also See for WH-ADC0916G9E8 WH-UX09FE8:
- Operating instructions manual (100 pages) ,
- Service manual (2 pages) ,
- Service manual (65 pages)
Table of Contents
18.6 To Remove Pressure Relief Valve, Flow Switch and Air Purge Valve
When reinstall Flow Switch, ensure the arrow on the flow switch is parallel with the pipe shaft and is facing in
the direction of flow.
During reinstall Air Purge Valve.
18.7 To Remove Water Pump
2. Remove 2 screws from the water pump.
5. Turn the Air Purge Valve
anti-clockwise then remove.
Air Purge Valve
3. Pull outward to remove
Pressure Relief Valve.
2. Pull down to remove
water hose.
Make sure plug is fully close
in clockwise direction.
Apply some water based grease
on packing surface before fix
with shut off valve.
1. Disconnect CN-PUMP2 from
electronic controller.
1. Remove 2 retaining rings.
4. Turn the flow switch anti-clockwise
then remove Flow Switch.
Pressure Relief Valve
Packing
149
Flow Switch
Water Pump
3. Remove 2 retaining rings, then pull
out the Water Pump.
- Quick Links:
- Wh-Adc0916G9E8 Wh-Ux09Fe8
Hide quick links:
Table of Contents
Troubleshooting
