Panasonic DMP-UB900 Operating Instructions Manual page 31
Blu-ray disc player
Hide thumbs
Also See for DMP-UB900:
- Owner's manual (48 pages) ,
- Basic operating instructions manual (92 pages)
Table of Contents
BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If "Off" is selected, the unit outputs the primary
audio only.
≥ To enjoy BD-Video that supports Dolby Atmos
DTS:X
TM
Connect this unit to an AV amplifier or similar device that
supports it with an HDMI cable, and select the following
settings:
– Dolby D/Dolby D +/Dolby TrueHD: "Bitstream"
– DTS/DTS-HD: "Bitstream"
– BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
∫ OPTICAL / COAXIAL Down Sampling
Select whether or not to convert the sampling
frequency of the audio to be output from the
OPTICAL/COAXIAL terminal.
If you choose to convert the sampling frequency,
you can limit the maximum output to 48 kHz or
96 kHz.
≥ Set a frequency supported by the connected
device.
≥ When playing back BD-Video, signals are
converted to 48 kHz despite the settings in the
following cases:
– when the signals have a sampling frequency
of 192 kHz
– when the disc has copy protection
– when "BD-Video Secondary Audio" is set to
"On"
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select "Surround encoded", when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
"Digital Audio Output" is set to "Bitstream".
≥ The audio will be output in "Stereo" in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
∫ HDMI Output Settings of Music Playback
Minimise the audio noise during music playback
by automatically switching the video output to
1080i.
∫ Settings for High Clarity Sound
Set a terminal that will stop processing audio
signals or whether or not to turn on/off the unit's
or
®
display when "High Clarity Sound" (
"On (Video Off)" or "On (Video On)".
≥ Set an option for video playback and audio
playback.
∫ Audio Delay
Synchronization between picture and sound is
corrected by adjusting the delay time of the audio
output.
∫ Analogue Multi Channel
Multi-channel surround sound is output from the
AUDIO OUT terminal.
≥ If "On" is selected, audio will not be output from
the HDMI OUT terminal.
– Speaker presence and size
(
– Delay time (
– Channel balance (
To finish the speaker setting
Select "Complete".
3D
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Playback Message
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
28) is set to
)
)
)
SQT1293
31
Hide quick links:
Table of Contents
