Table of Contents
PRINTING (BASIC)
2 2 2 2 2 MULTIPLE COPY OR CONTINUOUS PRINTING
Multiple copies of a memorized image can be made by setting the number of prints to
more than one. The print quantity can be set for up to 200 prints or for continuous
printing until the paper or ink sheet is used up. Multiple quantity printing can be
cancelled if needed.
1
1
1
1 Press PRINT Q'ty {
1
printed.
•
The number of prints is displayed on the monitor screen.
The number will increase by pressing PRINT Q'ty { and decrease by pressing
•
PRINT Q'ty }.
•
The number switches in the order of;
1←→2← • • • → 9 ←→ 10 ←→ 20 ←→ 30 ←→ 40 ←→ 50 ←→ 100 ←→ 200 ←→ C ←→ 1
When you set to "C", continuous printing will be done until the paper or ink sheet is
used up.
2
2
2 Press PRINT button.
2
2
•
The number of prints you set is printed.
•
During continuous printing (except for selecting "C"), the set number on the monitor
will be counted down every time one sheet is printed. When printing is completed,
the counter will be reset to the original set number. This will not reset when turning
off the power (It will not be reset to "1".)
•
If you wish to stop printing;
Press PRINT Q'ty { and } buttons. After printing the current page,
•
the counter will be reset to "1." Pressing PRINT Q'ty { and } buttons are
also available to cancel the reserved printing.
•
If you wish to stop printing without completing the current page, press STOP
button. The image will be printed imcompletely and come out from the print
outlet.
If a blackish image is continuously printed, the internal temperature may rise and cause
the unit to switch to a stand-by condition during printing. In this case, an error message
"OVER HEAT" will be displayed on the monitor. Wait until the error message goes off.
When temperature drops and the message goes off, printing resumes.
22
{
{
}
}
{ ,}
{
} button to set the number of prints to be
}
NOTE
No. of print setting
PRG. 1
Q'ty 1
LIVE
VIDEO
[ABC] FRAME
Table of Contents
