Summary of Contents for Bosch GST 75 BE PROFESSIONAL
Page 1
GST 75 BE PROFESSIONAL Bedienungsanleitung Operating instructions Instructions d’emploi Instrucciones de servicio Manual de instruções Istruzioni d’uso Gebruiksaanwijzing Betjeningsvejledning Bruksanvisning Brukerveiledningen Käyttöohje Οδηγία χειρισµού Kullanım kılavuzu Instrukcja obsługi Návod k obsluze Návod na používanie Használati utasítás Руководство по эксплуатации Інструкція з експлуатації...
General Power Tool Safety 3) Personal safety a) Stay alert, watch what you are doing and Warnings use common sense when operating a power tool. Do not use a power tool while Read all safety warnings and all WARNING you are tired or under the influence of instructions.
d) Store idle power tools out of the reach of Never use the machine with a damaged children and do not allow persons unfa- cable. Do not touch the damaged cable and miliar with the power tool or these pull the mains plug when the cable is dam- instructions to operate the power tool.
Page 7
Overall vibrational values (vector sum of three direc- Intended Use tions) determined according to EN 60745: When sawing wood: Vibrational emission value The machine is intended for making separating cuts =5.7 m/s , uncertainty K=1.5 m/s and cut-outs in wood, plastic, metal, ceramic plates When sawing sheet metal: Vibrational emission value and rubber while resting firmly on the workpiece.
Page 8
For this, lightly push the end of the dust cover together and pull it off to the front. 15.05.2006, Robert Bosch GmbH, Power Tools Division D-70145 Leinfelden-Echterdingen Connecting the Dust Extraction (see figures C–D)
Operation • Before tightening the screw 20, push the base plate 7 toward the vacuum connection 6 until it engages. Operating Modes Sawing with the base plate 7 offset is possible only with a mitre angle of 0°. In addition, the parallel guide Before any work on the machine itself, pull with circle cutter 26 (accessory) as well as the splinter the mains plug.
Parallel Guide with Circle Cutter (Accessory) Check the guide roller 10 regularly. If worn, it must be For cuts using the parallel guide with circle cutter 26 replaced through an authorised Bosch after-sales (accessory), the thickness of the material must not service agent.
Page 11
Fax: ....+353 (0)1 / 4 59 80 30 Australia and New Zealand Robert Bosch Australia Pty. Ltd. RBAU/SPT 1555 Centre Road Do not connect the blue or brown wire to the earth P.O.