3 Troubleshooting Guide 3.1. Troubleshooting quick reference chart 3.2. Inspection part/inspection method/remedy according to the troubleshooting quick reference guide. Inspection Inspection part Inspection method Remedy code Switch • Check the continuity of the switch(with Switch turned on). • If there is no continuity, replace the Switch.
Page 5
Inspection Inspection part Inspection method Remedy code Fuse Unit • Check the continuity of the Fuse Unit. • Replace the Fuse Unit. • If blown, confirm that the Fan Motor Unit is not locked and that coil • Replace the Fan Motor Unit. burnout has not occurred.
Inspection Inspection part Inspection method Remedy code Nozzle Wand Unit • Insert the connector of the Nozzle Wand Unit into the P.C.B. E Unit • Replace the Nozzle Wand Unit. and check the continuity between the following terminals with the pipe portion down.
4 Disassembly and Assembly Instructions * Attention (1) When disassembling the vacuum cleaner, check the connections and wiring (pulling) of each component, and ensure that everything is restored correctly once repairs are complete. (2) Handle all disassembled components and packing with care, and be sure to replace any components that may be acci- dentally damaged.
Page 8
3. Remove the Hose Unit from the Rear Body Unit while 6. Lift up the Suction Inlet Unit a little, then bring it down to pressing the protrusion at the bottom of the Hose Unit. the rear and remove it. 4.
4.2. Replacement of the Fan Motor 8. Press the Floor Nozzle Removal Button and remove the Nozzle Assy. Unit 1. Refer to the "Disassembly of the Body" page and disas- semble the Body. 2. Remove the screw. 9. Remove the 5 screws of the Rear Body Unit. 3.
Page 10
4. Peel off Gasket S and the Packing U, then use a flathead screwdriver to release the two Tab Portions between the Motor Case Set and the Curved Pipe Unit. 5. Remove the Curved Pipe Unit, Motor Case Set, Motor Support Rubber (Front), and the Motor Support Rubber Unit (Rear).
4.3. Removal of the Nozzle Holder Unit 1. Refer to the "Disassembly of the Body" page and disas- 4. Remove the Front Body and the Exhaust Unit from the semble the Body. Rear Body Unit. 2. Refer to the "Replacement of the Fan Motor Unit" page and remove the motor related parts.
4.4. Removal of the Switches 6. Release the Tab Portion with a flathead screwdriver and lift straight up, then remove the Nozzle Holder Unit. 1. Refer to the "Disassembly of the Body" page and disas- semble the Body. 2. Refer to the "Replacement of the Fan Motor Unit" page and remove the motor related parts.
4.5. Replacement of the Cord Set *When assembling, be sure that the lead wires of the switches are wired as in the diagram. 1. Refer to the "Disassembly of the Body" page and disas- semble the Body. 2. Refer to the "Replacement of the Fan Motor Unit" page and remove the motor related parts.
4.6. Removal of the Handle Sup- 2. Remove the Brush Cover Unit and the Agitator Assy. porter Unit 1. Refer to the "Disassembly of the Body" page and disas- semble the Body. 2. Refer to the "Replacement of the Fan Motor Unit" page and remove the motor related parts.
4.9. Removal of the Nozzle Wand 5. Return the Nozzle so that the front is up, and remove the Floor Nozzle Upper Assy. Unit 1. Remove the connector of the Nozzle Wand Unit that is inserted in the P.C.B. E Unit, then remove the Nozzle Wand Unit.
4.11. Body Wiring Firmly insert the lead wires into the grooves as in the diagram below. 4.12. Nozzle Assy Wiring Firmly insert the lead wires into the grooves as in the diagram below.
5 Wiring Connection Diagram When replacing the FAN MOTOR UNIT or SWITCHES, always cover the tab-on connecting terminals with Gasket V after making the connections.
6.4. PARTS LIST (BODY UNIT) Safety Ref. No. Part No. Part Name & Description Pcs/Set Remarks AMV88KD20K0P DUST COMPARTMENT UNIT MC-UL712 AMV88KCV0W0P DUST COMPARTMENT UNIT MC-UL710 AMC36P11020P ATTACHMENT ASSY (CLEANING BRUSH) AMV98HD20K0P LID UNIT MC-UL712 AMV98HCV0W0P LID UNIT MC-UL710 AMV95KCV000P FILTER UNIT (WASHABLE FILTER) AMV96KCV0G0P...
6.5. PARTS LIST (PACKING) Safety Ref. No. Part No. Part Name & Description Pcs/Set Remarks AMV61ZD20K0P INDIVIDUAL CARTON MC-UL712 AMV61ZCV0W0P INDIVIDUAL CARTON MC-UL710 AMV01ZCV008P INSTRUCTION BOOK AMV69ZCV000P CUSHION A AMV70ZCV000P CUSHION B AMV0TZCV000P CUSHION C AMV56ZCV000P CUSHION BOTTOM AMV70ACV000P BODY CUSHION AMV10ZCV000P BODY BAG AMV12ZCV000P...