Copying A Configuration File To Or From A Tftp Server - HP ProCurve 9304M Installation And Configuration Manual
Routing switches
Hide thumbs
Also See for ProCurve 9304M:
- Management and configuration manual (690 pages) ,
- Installation and getting started manual (348 pages) ,
- User manual (236 pages)
Table of Contents
USING THE CLI
To disable or re-enable Syslog messages when the startup-config file is changed, use the following command:
Syntax: [no] logging enable config-changed
USING THE WEB MANAGEMENT INTERFACE
You cannot disable logging of startup-config changes using the Web management interface.
Copying a Configuration File to or from a TFTP Server
To copy the startup-config or running-config file to or from a TFTP server, use one of the following methods.
NOTE: You can name the configuration file when you copy it to a TFTP server. However, when you copy a
configuration file from the server to an HP device, the file is always copied as "startup-config" or "running-config",
depending on which type of file you saved to the server.
USING THE CLI
To initiate transfers of configuration files to or from a TFTP server using the CLI, enter one of the following
commands:
•
copy startup-config tftp – Use this command to upload a copy of the startup
configuration file from the Routing Switch to a TFTP server.
•
copy running-config tftp – Use this command to upload a copy of the running
configuration file from the Routing Switch to a TFTP server.
•
copy tftp startup-config – Use this command to download a copy of the startup
configuration file from a TFTP server to a Routing Switch.
USING THE WEB MANAGEMENT INTERFACE
To initiate transfers of configuration files to and from a TFTP server using the Web management interface:
1. Log on to the device using a valid user name and password for read-write access. The System configuration
dialog is displayed.
2. Click on the plus sign next to Command in the tree view to expand the list of command options.
3. Click on the plus sign next to TFTP under Command in the tree view to expand the list of TFTP options.
4. Select the Configuration link to display the following panel.
5. Enter the address of the TFTP server in the TFTP Server IP field.
6. Enter the configuration file name in the Configuration File Name field.
7. Click on one of the following buttons to start the file transfer:
Updating Software Images and Configuration Files
14 - 13
Chapters
Table of Contents
Troubleshooting
