Adjustment Of Wind Direction - Toshiba RAV-SM563UT-E Owner's Manual

Hide thumbs Also See for RAV-SM563UT-E:
Table of Contents
Available languages

Available languages

ADJUSTMENT OF WIND DIRECTION

• When the air conditioner stops, the louver (adjustment plate of up/down wind direction) directs downward
automatically.
• When the heating operation is in READY states, the louver (adjustment plate of up/down wind direction)
directs upward. The swinging starts after HEAT READY status cleared, SWING
remote controller even if the heating operation is in READY status.
How to set up the wind direction
1
SWING/FIX
Push
during operation.
The wind direction changes for every push of the button.
In HEAT operation
Direct the louver (adjustment plate of up/down wind direction) downward. If
directing at upward, hot air may not come to the foot.
In COOL/DRY operation
Direct the louver (adjustment plate of up/down wind direction) upward. If directing
it downward, the dew may from on the surface of the air discharge port and may
drop down.
How to start swinging
1
SWING/FIX
Push
, set the louver (adjustment
plate of up/down wind direction) direction
to the lowest position, and then push
again.
SWING
is displayed and the up/down wind
direction is automatically selected.
How to stop swinging
1
Push SWING/WIND again while the louver
is swinging.
• The louver stops at a position when you
push. After then, if pushing
direction descends from the highest posi-
tion.
• In COOL/DRY operation, the louver does not
stop as it directs downward. If stopping the
louver as it directs downward during swing
operation, it stops after moving to the 3
position from the highest position.
SWING/FIX
SWING/FIX
, the wind
rd
8
is displayed on the
TEMP.
TIMER SET
TIME
SWING/FIX
FILTER
RESET TEST
SET CL
In FAN operation
Initial setup
Display when stopping the swing
Fan/Heat
operation
Initial setup
Initial setup
ON / OFF
FAN
MODE
VENT
UNIT
In all modes
Series of
operation
Cool/Dry
operation
Table of Contents
loading

Table of Contents