Eliminating Minor Faults Yourself - Bosch KGN series User Manual

Before you call customer service:

Please check whether you can eliminate the fault yourself based on the following

information.

Customer service will charge you for advice – even if the appliance is still under

guarantee!

Fault

Temperature differs greatly

from the set value.

The light does not function.

Displays do not illuminate.

It is too cold in the

refrigerator compartment or

in the cold storage

compartment.

Possible cause

The LED light is defective.

Appliance was open too

long.

Light is switched off after

approx. 10 min.

Power failure; the fuse has

been switched off; the mains

plug has not been inserted

properly.

Remedial action

In some cases it is adequate to switch off

the appliance for 5 minutes.

If the temperature is too high wait a few hours

and check whether the temperature has

approached the set value.

If the temperature is too low check

the temperature again the next day.

See chapter "Light (LED)" section.

When the appliance is closed and opened,

the light is on again.

Connect mains plug. Check whether the power

is on, check the fuses.

Set the temperature in the refrigerator

compartment slightly warmer.

Push controller for the cold storage

compartment to the left. Fig. (

en

19