5B-6 Manual Transmission/Transaxle:
Gear Shift Control Lever and Cable Removal
and Installation
Removal
1) Remove console box.
2) Disconnect cable ends (4) from pivot (5) of gear shift
control lever assembly.
3) Disconnect gear shift and select control cables (1)
from gear shift control lever assembly (2) while
pressing claw (6) as shown in figure.
4) Remove gear shift control lever assembly mounting
nuts (3) and gear shift lever assembly from floor
panel.
1
3
5) Disconnect gear shift and select control cables from
transaxle referring to step 2) to step 5) of
"Dismounting" under "Manual Transaxle Unit
Dismounting and Remounting".
6) Remove cable grommet bolt, and then remove gear
shift and select control cables from floor panel.
Installation
Reverse removal procedure for installation nothing the
following.
• Tighten each bolts and nuts to specified torque
referring to "Gear Shift Control Lever and Cable
Components".
• Adjust gear select control cable referring to "Gear
Select Control Cable Adjustment".
S7RS0B5206004
6
2
3
5
4
I7RS0A521002-01
Gear Select Control Cable Adjustment
1) Release lock plate (1) which restricts moving of
cable end holder (2).
2) Push cable end holder (2) out from adjuster (4) using
appropriate tool (3) to disengage cable.
S7RS0B5206005
I4RS0A520004-01