On/Off Setting Of Econavi Function - Panasonic CZ-RTC4 Operating Instructions Manual

Hide thumbs Also See for CZ-RTC4:

Table of Contents

ECONAVI Function

ON/OFF setting of ECONAVI function

Using the remote controller, you can switch the ECONAVI function ON/OFF.

Press [ECONAVI] to ON the

ECONAVI function.

* When ECONAVI is enabled,

will appear.

Press [ECONAVI] to OFF.

* When the indoor unit is stopped,

will disappear.

Note

 Turn the ECONAVI function OFF if:

- You want to maintain the room temperature at a set temperature.

- You want to keep air conditioner running while nobody is in a room.

- The sensor fails.

- Only infants, babies, or people only with disabilities are in the room.

WARNING

Do not use the ECONAVI function in a room with disabled persons or infants only.

Due to their limited motions, the ECONAVI sensor may judge no person is present,

causing the indoor unit to stop the operation.

1 / 2

(EN)

Table of Contents