Registration; Answering System Setup; Wall Mounting - GE 25860 User Manual

Hide thumbs Also See for 25860:

Table of Contents

Available languages

NOTE: For best results, charge the telephone/answering system on a ﬂat

surface before hanging it on the wall.

Slip the mounting holes (on the back of the base) over the wall plate posts

and slide the unit down into place. (Wall plate not included.)

Registration

YOU MUST REGISTER BOTH HANDSETSTOTHE MAIN BASE BEFORE USE!

a) 1st handset - The 1st handset being charged on the main base station

will automatically register after 16 hours of charging.

b) 2nd handset - After the 2nd handset has been charged for 16 hours on

the extra charger, place it on the main base station for 20 seconds, it will

then automatically register.

NOTE: "PLEASE REGISTER" will show on the display if the handsets have not

been registered. Once the handsets have completed regisration successfully,

"HANDSET 1" and "HANDSET 2" will show on the handset's display.

NOTE: In case of a power failure of more than 5 minutes, you must put both

handsets on the main base cradle for 20 seconds to re-register.

This section shows you how to set up your answering system to receive

incoming calls. Before you begin the set up process, you must turn on the

answering system.

Table of Contents