Reversing Trim Ring; Reinstalling Trim Ring; Reinstalling Trim Plug - Electrolux EIGD55H Technical & Service Manual

Wave-touch & iq-touch front-load dryer

Hide thumbs Also See for EIGD55H:

Table of Contents

Reversing Trim Ring

1. Trim ring orientation is marked on the back.

2. Remove the trim ring cover plate. To remove the

cover plate from the right, pivot point is up. To

remove the cover plate from the left, pivot point is

down. (See Figure 2-45)

Figure 2-45.

1. Close the door.

2. Orient the trim so 12 position is approximately

¾" to the left of top center. The opening in the

trim ring should be on the hinge side.

3. Insert the trim ring in the slots and rotate it

clockwise approximately ¾". (See Figure 2-46)

Figure 2-46.

1. Open the door to a 90 degree angle.

2. Install the trim plug with 1 long, course thread,

panhead screw. (See Figure 2-47)

3. Plug in washer and continue operation.

2-21

Installation Information

Figure 2-47.

Table of Contents