Intended Use; Assembly And Adjustments - DeWalt D25980 Instruction Manual
Hide thumbs
Also See for D25980:
- Original instructions manual (117 pages) ,
- Manual (29 pages) ,
- Instruction manual (25 pages)
Table of Contents
Available languages
Available languages
FIG. 2
E
F
G
H
INTENDED USE
D25980 demolition hammer has been designed for professional
heavy duty demolition, chipping and chasing applications in concrete,
brick, stone and other masonry materials.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These demolition hammers are professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Soft Start Feature
The soft start feature allows the impact rate to build up more slowly,
thus preventing the chisel or point from "bouncing" around on the
masonry when starting up.
Fully Vibration-dampened Handles
(fig. 1)
The dampers in the handles (B) absorb the vibrations transmitted to
the user. This improves user comfort during the operation.
J
K
L
I
25
Active Vibration Control
The active vibration control neutralises rebound vibration from the
hammer mechanism. Lowering hand and arm vibration, it allows
more comfortable use for longer periods of time and extends the life
of the unit.
ASSEMBLY AND ADJUSTMENTS
WARNING: Prior to assembly and adjustment, ALWAYS unplug
tool.
WARNING: Always wear gloves when changing accessories.
The exposed metal parts on the tool and accessory may become
extremely hot during operation.
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
WALT, recommended accessories should be used with
E
this product.
Inserting And Removing 28 mm Hex
Accessories (fig. 3–5)
This machine uses chisels with a
28 mm hex. shank. We recommend to
use professional accessories only.
WARNING: Since accessories other
than those offered by D
WALT have not
E
been tested with this product, the use of
such accessories may entail hazardous situations. To reduce the risk
of injury, use only accessories recommended by D
Clean and grease the chisel shank.
WARNING: Do not apply lubricant to the machine.
TO FIT A CHISEL WITH GROOVE IN THE SHANK, PROCEED
AS FOLLOWS (FIG. 4):
1. Pull the tool retainer (C) to the unlock position.
FIG. 3
WALT.
E
- Quick Links:
- Assembly and Adjustments
Hide quick links:
Table of Contents
