Power Connector - HP Pavilion 17 Maintenance And Service Manual
Hide thumbs
Also See for Pavilion 17:
- Maintenance and service manual (166 pages) ,
- Maintenance and service manual (124 pages) ,
- Maintenance and service manual (120 pages)
Table of Contents
Power connector
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
7.
Remove the system board (see
To remove the power connector cable:
1.
Pull the tab away from the connector (1).
2.
Remove the Phillips PM2.5×3.0 screw (2) from the left hinge that sits above the power connector.
3.
Remove the power connector (3) from the computer.
Reverse this procedure to install the power connector cable.
56
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
29).
Optical drive on page
Bottom cover on page
System board on page
30).
34).
50).
Spare part number
809295-001
- Quick Links:
- Product Description
- Right Side
- Left Side
- Hard Drive
Hide quick links:
Table of Contents
