Mx-Fn23 (Finisher); Unpacking; Installation - Sharp MX-M354N Installation Manual
Multifunctional system
Hide thumbs
Also See for MX-M354N:
- Operation manual (799 pages) ,
- Service manual (257 pages) ,
- Technical handy manual (32 pages)
Table of Contents
[7] MX-FN23 (FINISHER)
MX-M264U
1.
Unpacking
MEMO: When removing the finisher, put your hand beneath the
unit and lift it up as shown below.
Check to confirm that all the packed parts are provided.
FIN connection unit
FIN front cover
Second paper exit unit
Rail dummy cover
M3 x 8 S tight bind
M3 x 10 S tight bind
(4 pcs.)
(4 pcs.)
Service Manual
2.
NOTE: Turn off the main switch of the machine and then remove
1)
2)
3)
Paper holding arm
Resin grip
Staple position label
MX-M264U MX-FN23 (FINISHER) 7 – 1
Installation
the power plug of the machine from the outlet.
Open the front cover.
Remove the screws, and remove the left cabinet.
Remove the screw which are fixing the paper exit tray.
Remove the paper exit tray by using care for the tray paper
presence detection harness which is connected to the back
side of the paper exit tray.
Hide quick links:
Table of Contents
