Default Zone Types (Configurations) - GE NetworX NX-6V2 Installation And Startup

Segment 2:

1 = On enables the LED Extinguish feature.

2 = On enables the Require Code for Bypassing feature.

3 = On enables the Zone Bypassed Sounder Alert feature.

4 = On enables the AC Power/Low Battery Sounder Alert feature.

5 = On enables Bypass toggle.

6 = On enables Silent Auto Arm.

7 = On enables the Automatic Instant feature.

8 = On enables Instant mode toggle. (Applies to NX-1208E / NX-1248E keypads)

Segment 3:

1 = On enables Opening and Closing reports.

2 = On enables Zone Bypass reporting.

3 = On enables Zone Restore reporting.

4 = On enables Zone Trouble reporting.

5 = On enables Zone Tamper reporting.

6 = On enables the Cancel reporting.

7 = On enables the Recent Closing report.

8 = On enables the Exit Error report.

Segment 4:

1 = On enables Late to Close / Early to Open.

2 = On enables Auto Arm in Stay Mode.

3 = On disables the door delays in Night mode. (Applies to NX-1208E / NX-1248E keypads)

4 - 8 = Reserved.

Segment 5:

Reserved

L

24

Location 24 is used to program the Entry/Exit times. There are 2 separate Entry/Exit times.

Segment 1,

Entry time 1:

Segment 2,

Exit time 1:

Segment 3,

Entry time 2:

Segment 4,

Exit time 2:

Segments 5 & 6

XIII.

Zones can be programmed to be one of thirty different zone types (configurations). Zone types 17 - 20 can be used for wireless or

hardwired zones using European double EOL configuration. The default zone types are listed below. These zone types can be

customized by programming locations 110-169.

DATA

1

DAY ZONE - Instant when system is armed trouble zone when system is disarmed.

2

24-HOUR AUDIBLE - Creates an instant yelping siren alarm regardless of the armed state of the control panel.

ENTRY/EXIT DELAY 1- A trip will start entry delay 1. The lack of a trip during exit delay will enable the Automatic

3

Bypass or Instant mode if so programmed.

FOLLOWER WITH AUTO- BYPASS DISABLED - This zone will be instant when the system is armed and no entry or

4

exit delays are being timed. It is delayed during entry and exit delay 1 times. This zone will not automatically bypass even

if enabled in Segment 1 of Location 23.

INTERIOR FOLLOWER WITH AUTO- BYPASS ENABLED - This zone will be instant when the system is armed and no

5

entry or exit delay is being timed. It is delayed during entry and exit delay 1 times. This zone will automatically bypass if

enabled in Segment 1 of Location 23.

6

INSTANT - This zone creates an instant alarm whenever it is tripped and the Armed LED is on.

24-HOUR SILENT - Creates an instant silent alarm regardless of the armed state of the control panel. It will not display

7

on the keypad.

FIRE - This zone will light the Fire LED and sound the temporal siren each time the zone is shorted. It will also rapidly

8

flash the Fire LED indicating a trouble if the zone is open.

16

ENTRY / EXIT TIMERS

This is the entry time that will be used when a delay 1 zone type initiates an entry delay. Valid

entries are 30-255 seconds.

This is the exit time that will be used for all zones designated as delay 1. Valid entries are 45-255

seconds.

This is the entry time that will be used when a delay 2 zone type initiates an entry delay. Valid

entries are 30-255 seconds.

This is the exit time that will be used for all zones designated as delay 2. Valid entries are 45-255

seconds.

Reserved.

DESCRIPTION OF DEFAULT ZONE TYPES

6 ............ numerical

NX-6V2 Control