Table of Contents
When the Recorded Image is not Clear...
If the Document Scanner Unit is
dirty, your documents may not
be transmitted clearly. If the Re-
cording Unit is dirty, the docu-
ment you receive may not be
clear. In that case, clean the
Document Scanner Unit or Re-
If the problem occurs during
cording Unit using the following
both a transmission and in copy
procedures. You can check
mode, check the Document
these problems by making a
Scanner Unit.
copy.
If the problem occurs during
Examples of print problem:
both receptions and copy mode,
check the Recording Unit.
Vertical black line(s)
Vertical white line(s)
Horizontal black line(s)
Horizontal white line(s)
Faint or blurred print
224
Document Scanner Cleaning Procedure
1
Open the Operation
Panel
Stained
Open the Operation Panel.
Wipe the Glass
2
Surface and White
Plate
62
65
Wipe the Glass surface and the
White Plate with a soft dry cloth.
•
If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with a
dry cloth.
3
Wipe the ADF Pad
and Rollers
66
Wipe the ADF Pad and Rollers
with a dry cloth.
•
If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with a
dry cloth.
CAUTION:
Be careful not to injure your
finger(s) on the ADF spring
when you wipe the ADF pad.
Chapters
Table of Contents
