Panasonic KX-TS520FX - Integrated Telephone System Operating Instructions

Getting Started

Controls

1. Auto dial {M1}, {M2}, {M3}
2. VOLUME ,
3. {PAUSE}
4. {TONE}
5. {REDIAL}
6. {FLASH}
7. {PROGRAM}

Accessory information

• Telephone line cord - one ;

Connections

1. Connect the handset cord () to the handset and the unit. Connect the telephone line cord until it clicks into the unit and telephone line jack (). After line connection, lift the handset to check for a dial tone.

• If you cannot dial, set to PULSE.
  

3. Set the RINGER selector to HIGH, LOW or OFF.
   (Example: "HIGH" is selected.)

• When set to OFF, the unit will not ring but the ringer indicator will still flashing.
  

Connecting a communication device

If you connect a communication device (computer, modem, fax, answering machine, etc.) to the telephone line, you can connect it through this unit using the DATA jack. After connecting the handset and telephone line cord, connect the communication device telephone line cord to the DATA jack.

Making/Answering Calls

Making calls

To redial the last number dialed
Lift the handset - Press {REDIAL}.

• {REDIAL} will dial the last number you called manually, not a One-Touch Dialer number (3-B).

To adjust the receiver volume (6 levels)
Press or repeatedly while talking.

Answering calls

When a call is being received, the unit rings, the ringer indicator flashes quickly. You can j a telephone number is dialed in PULSE mode, answer the call by simply lifting the handset

• The ringer indicator will flash when
  • a telephone number is dialed in PULSE mode, or
  • someone picks up or hangs up another phone connected to the same phone line.
    This is normal.

One-Touch Dialer

Storing phone numbers in memory

You can store up to 3 phone numbers in the one-touch auto dial buttons {M1}, {M2} or {M3}. Do not press any one-touch auto dial buttons before storing to prevent misoperation.

1. Lift the handset →Press {PROGRAM}.
2. Press the one-touch auto dial button {M1}, {M2} or {M3}.
3. Press {PROGRAM}.

• If a pause is required for dialing, press {PAUSE} in step 3. A pause stored in a phone number counts as one digit (4-C).

If you misprogram
Hang up - Restart from step 1.

To erase a stored number
Lift the handset - Press {PROGRAM} - the one-touch auto dial button {M1}, {M2} or {M3} of the phone number to be erased - {PAUSE} - {PROGRAM} - Hang up.

Memory sticker
Use the memory sticker as a name or phone number index for the stored numbers.

Dialing a stored number

1. Press the one-touch auto dial button {M1}, {M2} or {M3}.

• {REDIAL} does not work for One-Touch Dialer.
  To dial the number again, hang up and repeat steps 1 and 2.

Special Features

For call waiting service users

To use call waiting, you must first subscribe to the call waiting service of your service provider/ telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone.

1. Press {FLASH} to answer the 2nd call.
2. To switch between calls, press {FLASH}.

Note:

Temporary tone dialing (for rotary/pulse service users)

You can temporarily switch the dialing mode to tone when you need to access touch-tone services (for example, answering services, telephone banking services, etc.). Press {TONE} before entering access numbers which require tone dialing.

Pause (for PBX/long distance service users)

A pause is sometimes required when making calls using a PBX or long distance service.
Example: If you need to dial the line access number "9" when making outside calls with a PBX:

1. {9} - {PAUSE}

Note:

• A 2.1 second pause is inserted each time {PAUSE} is pressed. Repeat as needed to create longer pauses.

Things You Should Know

Wall mounting

1. Press the tabs in the direction of the arrows (), then remove the wall mounting adaptor ().
   

• The word "UP WALL" should face upward
  .

3. Drive screws (not included) into the wall using the wall template below. Connect the telephone line cord. Mount the unit and then slide it down.
   

To temporarily set the handset down during a conversation, place it as shown here.

Troubleshooting

Problem	Cause/solution
The unit does not work.
The call cannot be connected even if you dialed correctly.
The unit does not ring.
You cannot store a phone number in memory.
The other party suddenly cannot hear your voice during a conversation.	{PROGRAM} was pressed during the conversation. Press {PROGRAM} again.
You cannot redial by pressing {REDIAL}.
Liquid or other form of moisture has entered the unit.

For your safety

To prevent severe injury and lost of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

Environment

Routine care

• Wipe the outer surface of the product with a soft moist cloth.

Notice for product disposal, transfer, or return

Specifications

Power Source	From telephone line
Dimensions (H x W x D)	Approx. 95 mm х 190 mm х 196 mm
Mass (Weight)	Approx. 518 g
Operating conditions	5°C–40°C, 20%–80% relative air humidity (dry)

Note:

Note:

Declaration of Conformity:
For information of Compliance with EU
relevant Regulatory Directives,

Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
http://www.ptc.panasonic.eu/doc

© Panasonic System Networks Malaysia
Sdn. Bhd. 2009

Panasonic Corporation
1006, Oaza Kadoma, Kadoma-shi,
Osaka 571-8501, Japan
http://www.panasonic.com

Documents / Resources

References

• Panasonic Nederland | Informatie over al onze producten

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.