Panasonic KX-TS500 Integrated Telephone System Manual

PLEASE READ BEFORE USE AND SAVE.

For assistance, visit our website: http://www.panasonic.com/support for customers in the USA or Puerto Rico.

Getting Started

Location of controls

Accessories (included)

• Handset - one
  Order No.
  PQJXE0401Z (Black)
  PQJXE0411Z (White)
• Handset Cord - one
  Order No.
  PQJA212N (Black)
  PQJA212M (White)
• Telephone Line Cord - one
  Order No. PQJA10075Z

Settings

1. Connect the telephone line cord ().
2. Connect the handset cord (), then confirm the dial tone.
3. Set the DIALING MODE selector to TONE.
   • If you cannot dial, set to PULSE.
     
4. Set the RINGER selector to HIGH, LOW or OFF.
   (Ex. "LOW" is selected.)
   

Operation

Making Calls

1. Dial a phone number.

To redial the last number dialed

Lift the handset. → Press .

To adjust the receiver volume (4 levels) while talking

To increase, press .
To decrease, press .

Answering Calls

Special Features

For Call Waiting Service Users

Press if you hear a call-waiting tone while talking.

• To return to the first caller, press again.

Temporary Tone Dialing

(For Rotary or Pulse Service Users)

Press (TONE) before entering access numbers which require tone dialing.

Things You Should Know

Wall Mounting

The unit can be mounted on a wall phone plate.

1. Press the tabs in the direction of the arrows (), then remove the wall mounting adaptor ().
   
2. Tuck the telephone line cord inside the wall mounting adaptor, and push it in the direction of the arrow ( and ).
   
3. Connect the telephone line cord. Mount the unit, then slide down.
   • Fasten the cord to prevent it from being disconnected.
     
     To temporarily set the handset down during a conversation, place it as shown here.
     

For assistance, please visit http://www.panasonic.com/support

Helpful Information

• Environment — do not place the unit in a room where the temperature is less than 5ºC (41ºF) or greater than 40ºC (104ºF). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
• Routine care — wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
• If there is any trouble — disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone company.

If you need assistance with setup or operation

When you ship the product

Specifications

Power Source: From telephone line

Dimensions (H x W x D): Approx. 96 mm x 150 mm x 200 mm (3 ²⁵⁄₃₂" × 5 ²⁹⁄₃₂" × 7 ⁷⁄₈")

Mass (Weight): Approx. 475 g (1.05 lb.)

Dialing Mode: Tone (DTMF)/Pulse

Operating Environment: 5°C – 40°C (41°F – 104°F)

Specifications are subject to change without notice.

Compliance with TIA-1083 standard

Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.

Troubleshooting

For assistance, please visit http://www.panasonic.com/support

Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490

Printed in Malaysia PNQX1287TA FM0808NK50818