Table of Contents
Function of CTXS, FTXS, CDXS, FDXS, FVXS Series
1. Function of CTXS, FTXS, CDXS, FDXS, FVXS Series
1.1
Temperature Control
Definitions of
The definitions of temperatures are classified as following.
Temperatures
Temperature
The temperature of the room is detected by the room temperature thermistor. However, there is
difference between the temperature detected by room temperature thermistor and the temperature
Control
of lower part of the room, depending on the type of the indoor unit or installation condition.
Practically, the temperature control is done by the target temperature appropriately adjusted for the
indoor unit and the temperature detected by room temperature thermistor.
1.2
Frequency Principle
Control
The frequency of the compressor is controlled by the following 2 parameters:
Parameters
The target frequency is adapted by additional parameters in the following cases:
34
Room temperature: temperature of lower part of the room
Set temperature: temperature set by remote controller
Room thermistor temperature: temperature detected by room temperature thermistor
Target temperature: temperature determined by microcomputer
Room temperature
The illustration is for CTXS, FTXS series as representative.
The load condition of the operating indoor unit
The difference between the room thermistor temperature and the target temperature
Frequency restrictions
Initial settings
Forced cooling operation
Room thermistor temperature
SiUS121502E
Target temperature
Set temperature
(R12321)
Function and Control
- Quick Links:
- Outdoor Unit
- Outdoor Unit
- Outdoor Unit
Hide quick links:
Table of Contents
Troubleshooting
