Table of Contents
2-3. MECHANISM DECK
1 Two screws
2 Two collars
!¢ MD mechanism deck
!™ MD insulator
!£ Compression spring
2-4. SLIDER
3 Screw (+PTT2x4)
4 Earth lug
Slider (M) assembly
(+B2.6x18)
5 Two collares
Slider
B
Bracket (BD)
4 Two screws
(+B2.6x18)
A
0 MD
insulator
!¡ Compression spring
8 Two MD insulators
9 Two compression springs
6 Screw (+BVTT2.6x4)
7 Earth lug
Lever (SLM)
Torsion spring (SLM)
B Claw
D
5 Move the claw C on the slider up to the
E
Base rail
— 30 —
3 Rotate the pulley (BD) in the direction
of arrow A , and slide the slider (M)
assembly in the direction of arrow B .
(As the stopper catches halfway, lightly
push up the stopper in the fig. A to
release, then rotate the pulley (BD) in
the direction of arrow A .
Pulley (BD)
Fig. A
A Claw
1 Disengage a torsion spring
from the claw A .
2 Disengage the claw B , raise the
lever (SLM) upwards to remove.
C Claw
base rail in the direction of arrow D to
remove, and remove it in the direction of
arrow E .
Table of Contents
