Setting Up The Remote 1 And Remote 2 - Toshiba E-Studio 2500C Manual
Hide thumbs
Also See for E-Studio 2500C:
- Operator's manual (418 pages) ,
- Manual (232 pages) ,
- Scanning manual (146 pages)
Table of Contents
Setting up the Remote 1 and Remote 2
In the Remote 1 and Remote 2, you can specify how users can select the network folders for
Save as file destination when you select "Use Network Folder Destination" in the Destination
setting. You can specify two network folders; Remote 1 and Remote 2. The setting items are
the same in the Remote 1 and Remote 2.
The network folder as a destination must be set to be shared by all users.
1
2
3
4
5
6
7
9
1) Allow the following network folder to be used as a destination
Select this to restrict users to select only the network folder that you specified. Otherwise,
select "Allow user to select network folder to be used as a destination".
2) Protocol
Select the protocol to be used for uploading a file to the network folder.
- SMB — Select this to send a file to the network folder using the SMB protocol.
- FTP — Select this to send a file to the FTP server.
- NetWare IPX/SPX — Select this to send a file to the NetWare file server using the IPX/
SPX protocol.
- NetWare TCP/IP — Select this to send a file to the NetWare file server using the TCP/IP
protocol.
3) Server Name
When you select "FTP" as the protocol, enter the FTP server name or IP address where a
scanned file will be sent. For example, to send a scanned file to the "ftp://192.168.1.1/user/
scanned" FTP folder in the FTP server, enter "192.168.1.1" in this field. You can specify the
directory at the "Network Path" field.
When you select "NetWare IPX/SPX" as the protocol, enter the NetWare file server name or
Tree/Context name (when NDS is available).
When you select "NetWare TCP/IP" as the protocol, enter the IP address of the NetWare file
server.
4) Port Number (Command)
Enter the port number to be used for controls, if you select "FTP" as the protocol. Generally
"-" is entered for the control port. When "-" is entered, the port number, that is set at "FTP Cli-
ent" in the Network menu page of the Setup tab, will be used. Change this option if you want
to use another port number.
8
Setting up from TopAccess
181
Hide quick links:
Table of Contents
