KERN ECB Version 1.3 05/2007 Operating instruction Platform scale Tabel of contents: Technical data __________________________________________________ 4 Declaration of conformty _________________________________________ 5 Fundamental information (general)_________________________________ 6 Intended use _____________________________________________________ 6 Inappropriate use _________________________________________________ 6 Guarantee _______________________________________________________ 6 Monitoring the test substances______________________________________ 7...
2 - 3 sec. Optimal temp. of operation + 0° C ..+ 40° C Humidity max. 80 % (non-condensing) Size (W x D x H) mm 320 x 300 x 60 Weighing plate mm 320 x 260 Weight kg (net) ECB-BA-e-0713...
EN 50082-1 (EN 61000-4-6) : 1997 EN 50082-1 (EN 61000-4-5) : 1997 EN 50082-1 (EN 61000-4-11) : 1997 Date: 12.12.2002 Signature: Gottl. KERN & Sohn GmbH Management Gottl. KERN & Sohn GmbH, Ziegelei 1, D-72336 Balingen, Tel. +49-[0]7433/9933-0,Fax +49-[0]7433/9933-149 ECB-BA-e-0713...
The balance may only be used in compliance with the described guidelines. Varying areas of application/planned use must be approved by KERN in writing. 3.3 Guarantee The guarantee is not valid following...
For this purpose, the answerable user must define a suitable interval as well as the nature and scope of this check. Information is available on KERN’s home page (www.kern- sohn.com) with regard to the monitoring of balance test substances and the test...
6.2 Unpacking the Balance Carefully remove the balance from the packaging and out of the plastic covering, then place the balance on the assigned position. 6.2.1 Installation Install the balance in such a fashion that the weighing plate is absolutely horizontal. ECB-BA-e-0713...
Electric power supply is by means of the external mains supply circuit. The printed voltage level must comply with the local voltage. Only use original KERN mains supply circuits. The use of other makes is subject to approval by Kern.
Page 10
Rechargeable Battery Installation: 1. Remove battery cover 2. Slide spacer to left or right, lever down on corner, then remove the spacer 3. Insert and connect rechargeable battery ECB-BA-e-0713...
In this case switch the power off and on and repeat the adjustment process. Remove the weight from the weighing platform and the 0,00 display will automatically return to normal weighing mode. Adjustment has been successfully completed. ECB-BA-e-0713...
• Switch the balance with the “ON/OFF” key on and wait until display appears as "0.00". Position the tare load and press the “TARE” key. • The balance display becomes "0.00". • The item to be weighed can now be placed in the tare container and the weight can be read off. ECB-BA-e-0713...
„bl“ Backlight off Save the battery Backlight switches automatically „bl“ Save the battery off 10 sec after stable indication Confirm with the TARE key. Wait until the balance automatically returns to weigh- ing mode ECB-BA-e-0713...
Press the ON/OFF -key until „tr“ appears Confirm with the TARE key Press the ON/OFF key to switch among the settings: Display Mode „tr“ Auto-Zero on „tr“ Auto-Zero off Confirm with the TARE key. Wait until the balance automatically returns to weigh- ing mode ECB-BA-e-0713...
Press the ON/OFF key to switch among the settings: Display Mode Battery conservation through automatic „AF“ ON power-off 3 minutes after ending a weighing operation. „AF“ OFF AUTO-OFF function deactivated. Confirm with the TARE key. Wait until the balance automatically returns to weigh- ing mode ECB-BA-e-0713...
Confirm with the TARE key Press the ON/OFF key to switch among the settings: Display Mode Factory setting reset „rst“ YES No factory setting reset „rst“ NO Confirm with the TARE key. Wait until the balance automatically returns to weigh- ing mode ECB-BA-e-0713...
Remove any spilt material to be weighed immediately. 8.2 Maintenance, upkeep The device may only be opened by trained service engineers authorised by KERN. Disconnect from the mains supply before opening. 8.3 Disposal The operating company shall dispose of the packaging and the device in compliance with the valid national or regional law of the operating location.
• Electromagnetic fields / static charging (choose different location/switch off inter- fering device if possible) Switch the balance off if other error messages should appear and then switch on a- gain. Contact the manufacturer if the error message does not disappear. ECB-BA-e-0713...