Page 38
Record these numbers in the spaces provided below. This is a Class A product. In a domestic environment, this Refer to these numbers whenever you call upon your Sony product may cause radio interference in which case the dealer regarding this product.
Page 39
Dieser Apparat darf nicht im Wohnbereich verwendet des mesures appropriées. werden. Pour les clients en Europe Ce produit a été fabriqué par ou pour le compte de Sony For the customers in the U.S.A. Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 SONY LIMITED WARRANTY - Please visit Japon.
Projecting a 4K Signal in Quad-Screen Table of Contents Mode..........56 Chapter 4 Adjustments and Settings Chapter 1 Overview Using the SRX Controller Precautions..........41 Displaying the Control Function Menu On Viewing 3D Video Images ....43 Window..........58 Location and Function of Controls..43 PICTURE CONTROL Window ....
• Should any liquid or solid object fall into the cabinet, not be exposed to direct lighting or sunlight. unplug the unit and have it checked by your Sony dealer before operating it further. • Ceiling-mounted spot lighting is recommended. Use a •...
Page 42
On repacking Left side view Save the original shipping carton and packing material; Scatter parabolic they will come in handy if you ever have to ship your unit. curve in a case of For maximum protection, repack your unit as it was lamp explosion originally packed at the factory.
• You should only use 3D glasses for viewing 3D video Projector Unit images. • You should only use 3D glasses that Sony recommends. • Some people may experience discomfort (such as eye Front/Sides strain, fatigue, or nausea) when viewing 3D video images.
(green) (green) Save Log: This item is for service use. For details, consult shutting it down with the SRX your dealer or your local Sony representative. controller. Cooling fans are running. Password menu Used to reset the authentication passwords required for...
Page 45
The setting items that can be registered are as follows: Single 3D buttons: Used for projecting 3D images. For • [INPUT SELECT], [MASKING ADJUST] and [CUT details, contact your dealer or your local Sony OFF] settings in the SCREEN CONTROL window representative.
Page 46
CUT OFF ON/OFF buttons Used for projecting 3D images. For details, contact your dealer or your local Sony representative. Location and Function of Controls...
Preparations Chapter If you put something beside the ventilation holes for Precautions on exhaust on the side or rear of the projector, the exhaust may be inhaled into the projector through the ventilation Installation holes for intake, causing internal heat build-up and thereby activating the protection circuit.
Very dusty Installing the SRX Controller in a Computer for Controlling the Projector If you install the SRX Controller in a computer, you can control the projector from the computer. Unsuitable Conditions If a previous version of SRX Controller is already installed on the computer, uninstall the previous version Do not use the projector under the following conditions.
Click [Next]. The software license agreement appears. Read the agreement, select [I accept the terms in the license agreement], and then click [Next]. Note If you select [I do not accept the terms in the license If [Cancel] is selected, the application is not executed. agreement], the software will not be installed and the When the administrator password dialog is wizard will close.
Connect the computer to the ethernet cable (supplied) connected to the projector inside. For connecting the ethernet cable to the projector, consult your dealer or your local Sony representative. Note Set the IP address of the connected computer to be assingned from DHCP.
If the power of the projector remains on for a long period of time without the ethernet cable connected, the message “Sony Data Projector Initializing…” may appear in the STATUS MESSAGE window while you are setting up for networking after connecting the ethernet cable. This is not a malfunction of the projector.
To start the SRX Controller Starting the SRX Double-click the icon for the SRX Controller in the desktop window of the computer. Controller The SRX Controller starts and the Program Launcher screen is displayed. Turn on the projector’s main power, start SRX Controller, About the Program Launcher screen and then start the projector.
[Connect] menu on the menu bar to display the dialog. • For connecting the cable to the connector inside the Enter the new port number in the dialog and click [OK]. projector, consult your dealer or your local Sony representative. When connecting the computer via RS-232C...
• When an extension cable is used, the signal may not be optional LKRI-006 input board inside the projector. For input correctly due to signal reduction. details, contact your dealer or your local Sony • If you input 10-bit signals from a DVI-D connector only representative.
Projecting Chapter INSTALLATION window Projecting the Picture 8,10 Use a computer in which the SRX Controller is installed to project the picture on the screen. LAMP indicator MAIN indicator Set the power switch on the rear of the projector to the on position (:).
Turn on the equipment connected to the projector. To cut off the whole screen Click the [ON] button of [MUTING]. The whole screen Select the input signal to be projected on the screen. appears in black. To restore the picture, click the [OFF] button of [MUTING].
Adjustments and Settings Chapter Using the SRX Controller To clear the Control Function Menu Displaying the Control window Select [Quit] from the [File] menu on the menu bar, or Function Menu Window click the (close) button. To reset the settings that have been When you install the SRX Controller in a computer, you adjusted can operate the picture adjustments, input signal settings,...
Limited], which is compatible with DVI1.0 standard and the signal level is Limited Range compliance. fH: Displays the horizontal frequency. When the 10-bit signal based on Sony’s unique fV: Displays the vertical frequency. specification is input, select [10bit Twin Full] or...
Signal Adjust COLOR/FRAME Window Adjusts the picture quality of the input signal. Clicking increases the setting value, and The COLOR/FRAME window is used to adjust the input decreases it. signal. Clicking the [RESET] button resets the following four When [Quad-screen Mode] is selected with the INPUT settings to the factory preset values.
Adobe RGB: Select when projecting Adobe RGB CUSTOMIZE: Value set using CUSTOMIZE compatible computer signals. CUSTOM: Select when projecting a signal using the color gamut defined by the user. The default value is Frame Adjust the same as DCDM. Color Temp (temperature): Selects the color Adjusts the horizontal size and the position of the picture.
IMAGE FLIP INSTALLATION Window Flips the picture. Select it from the drop-down list displayed by clicking The INSTALLATION window is used to adjust the according to the installed condition of the projector. projected picture and to change the lamp output, etc. Off: Normal projection H: Flips the picture horizontally V: Flips the picture vertically...
H Shift – – SINGLE 3D ADJUST V Shift – – Used to project a 3D image. z: Adjustable/can be set For details, contact your dealer or your local Sony –: Not adjustable/cannot be set representative. Input Signals And Adjustable/Setting Items...
Sony representative. before the recommended time for replacement. Use them as a guide. Be sure to ask your dealer or your local Sony representative to replace a projection lamp. Recommended Replacement Time / Maintenance...
Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following guide. If the problem still persists, consult your dealer or your local Sony representative. Power Symptom Cause Remedy Power is not turned on.
Message number: WARN_xx FAILURE: Danger level - Low Message number: FAIL_xx If an error message is displayed, contact your dealer or your local Sony representative and give them the message and its number. ALERT: Danger level - High Message number Error message...
Page 67
Message number Error message Meaning ALERT_09 BOARD ERROR Trouble with power of PR1 board ALERT_10 BOARD ERROR Trouble with power of PR2 board ALERT_11 BOARD ERROR Trouble with power of SY board ALERT_12 BOARD DETACHED CN board disconnected ALERT_13 BOARD DETACHED MX board disconnected ALERT_14 BOARD DETACHED...
Message number Error message Meaning WARN_27 BALLAST ERROR Failure of the ballast communication for the lamp power WARN_28 BALLAST ERROR Incorrect settings of the lamp S/N WARN_30 COVER DETACHED Filter duct is detached WARN_31 FAN ERROR Abnormal in fan for PS2 WARN_32 FAN ERROR Abnormal in fan for PS1...
Operating temperature 1) When using the supplied High Brightness Mode filter. For details, contact 5°C to 35°C (41°F to 95°F) (About 20 your dealer or your local Sony representative. minutes of aging is recommended to provide better quality picture.) Electrical characteristics...
EXPIRATION OF THE WARRANTY, OR FOR DDC_SCL ANY OTHER REASON WHATSOEVER. DDC_SDA • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. DATA1– • SONY WILL NOT BE LIABLE FOR THE...
Index H Shift 61 Save Log 44 H Size 61 SCREEN CONTROL window 45 Sharpness 60 Numerics Signal Adjust 60, 63 Signal Info 59 3D Resolution Format 59 I/P Mode 59 Signal Mode 59 IMAGE FLIP 62 Specifications 69 INPUT SELECT 45, 56 SQUEEZE 62 Input Signals And Adjustable/Setting SRX Controller...
Page 73
• Sony assumes no responsibility for damages, loss of income, or any claims from a third party arising out of use of the system.